Cortadores de enchufes

A plug cutter is a cylindrical drill-press bit that cuts small wooden plugs from solid stock. These plugs are used to conceal counterbored screw heads, producing a cleaner surface than wood filler or putty.

A straight plug cutter produces a cylindrical plug with parallel sides, suitable for long counterbores and dowel-style fills. A tapered plug cutter produces a slightly conical plug that wedges tightly into a standard counterbored hole, creating a more secure fit with less chance of the plug popping out.

Plug cutters are designed for use in a drill press, which provides the perpendicular, wobble-free rotation needed for clean, concentric plugs. Using one in a handheld drill risks off-center cuts, torn grain, and tool damage.

The pairing depends on the plug cutter's listed diameter. Most tapered plug cutters specify the matching counterbore bit size — the Make It Snappy tapered plug cutters are designed to pair with standard drill bits from the same system for a matched fit.

After cutting, slide a flathead screwdriver or thin chisel into the kerf alongside the plug and gently lever it free. Avoid prying from the top; apply gentle lateral pressure at the base of the plug to pop it out cleanly.

Use the same species and cut from the same board as your project whenever possible. Matching grain direction and orientation minimizes visible color and texture differences after sanding and finishing. End-grain plugs are more visible; face-grain plugs blend better.

Both options are available. The 8-piece plug cutter & tenon set includes straight and tapered styles for maximum versatility, while the 5-piece extra-long dowel plug cutter set covers longer-reach applications.

Low drill-press speeds — typically 500 to 1,000 RPM — produce the cleanest plugs and reduce heat buildup. Higher speeds can burn the wood and dull the cutter prematurely. Consult the cutter manufacturer's guidelines for the specific diameter you are using.

Yes. Infinity Tools offers price matching on eligible products. See the price-match policy page for details and how to submit a request.

Cut the plug from the same board used for the project, orient the grain to match the surrounding surface, glue it in place with wood glue, let it cure fully, then pare or sand it flush before applying finish. The closer the grain and color match, the less visible the repair.