{"title":"Micro Jig","description":"\u003ch2\u003eMicro-Jig Push Blocks, Safety Grippers \u0026amp; Precision Woodworking Jigs\u003c\/h2\u003e\n\u003cp\u003eMicro-Jig tools are designed around one principle: keep your hands away from the blade while maintaining precise control over the workpiece. The GRR-RIPPER push block system is the most widely used aftermarket table saw safety accessory among professional woodworkers, applying downward and lateral pressure to the stock simultaneously so narrow rips and thin pieces move through the blade under full control.\u003c\/p\u003e\n\u003cp\u003eBeyond push blocks, the Micro-Jig lineup includes the MatchFit dovetail clamp system, tapering jigs, featherboards, and blade cleaning tools. The MatchFit system uses a routed dovetail groove—cut with a compatible router bit—to accept sliding clamps that hold workpieces to router table fences, sled surfaces, and fixture boards without traditional clamps getting in the way of the cut.\u003c\/p\u003e\n\u003ch3\u003eGRR-RIPPER, MatchFit \u0026amp; Precision Jigs\u003c\/h3\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/infinitytools.mom\/products\/micro-jig-grr-rip-smart-hook-push-block\"\u003eGRR-RIP Smart Hook Push Block\u003c\/a\u003e adds a hook-style heel that positively grips the trailing end of the workpiece to prevent it from lifting or shifting at the end of the cut—one of the most dangerous moments of a rip operation. The \u003ca href=\"https:\/\/infinitytools.mom\/products\/microjig-matchfit-dovetail-clamps-with-infinity-dovetail-router-bit\"\u003eMatchFit Dovetail Clamps with Infinity Dovetail Router Bit\u003c\/a\u003e package provides everything needed to add the MatchFit system to a new or existing router table setup. For angled work, the \u003ca href=\"https:\/\/infinitytools.mom\/products\/microjig-microdial-tapering-jig-table-saw-router-table\"\u003eMicroDial Tapering Jig\u003c\/a\u003e sets repeatable tapers by degree on both table saw and router table. The \u003ca href=\"https:\/\/infinitytools.mom\/products\/microjig-matchfit-dado-stop-pro-package\"\u003eMatchFit Dado Stop Pro Package\u003c\/a\u003e brings precision dado depth and width repeatability to the table saw sled.\u003c\/p\u003e\n\u003cp\u003eAll Micro-Jig products in this collection are stocked and ready to ship. Visit the \u003ca href=\"https:\/\/infinitytools.mom\/blogs\/learn\"\u003eInfinity Tools Learn blog\u003c\/a\u003e for setup guides and technique tips on integrating Micro-Jig tools into your workflow.\u003c\/p\u003e","products":[{"product_id":"micro-jig-grr-ripper-1-8-thin-stock-accessory","title":"MicroJIG GRR-Ripper 1\/8\" Thin-Stock Accessory","description":"\u003cstyle type=\"text\/css\"\u003e\n\u003c!--\nbody {\n\tmargin-left: 0px;\n\tmargin-top: 0px;\n\tmargin-right: 0px;\n\tmargin-bottom: 0px;\n}\n--\u003e\n\u003c\/style\u003e\n\u003cp\u003eA woodworker knows that eye-catching details are what really make a project stand out. If you're a magician in the woodshop, this 1\/8” Leg accessory makes you a surgeon. This new add-on for the GRR-Ripper is your scalpel on the table saw, allowing you to  reach new levels of excellence and achieve new dimensions of accuracy. This accessory allows you to make rips as thin as 1\/8\" without breaking a sweat. Prior to this accessory, the level of control and surgical precision would have been virtually impossible for manual feeding. Now, producing consistent, clean, safe, and controlled cuts is a reality for thousands of workshops around the world. \u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847560614177,"sku":"MJG-204","price":16.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-204_base_1.webp?v=1705897009"},{"product_id":"micro-jig-grr-ripper-deflector-connector","title":"MicroJIG GRR-Ripper Deflector \/ Connector","description":"\u003cstyle type=\"text\/css\"\u003e\n\u003c!--\nbody {\n\tmargin-left: 0px;\n\tmargin-top: 0px;\n\tmargin-right: 0px;\n\tmargin-bottom: 0px;\n}\n--\u003e\n\u003c\/style\u003e\n\u003cp\u003eThe MJ Deflector \/ Connector keeps flying wood chips at bay or acts as an extended blade guard for the GRR-Ripper. This useful accessory is great when working with larger stock when the need arrises to connect two GRR-Rippers together. A useful addition to the woodshop control system that never compromises your safety or the quality of your work.\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847561761057,"sku":"MJG-208","price":13.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-208_base.webp?v=1705897013"},{"product_id":"micro-jig-grr-ripper-handle-bridge-kit","title":"MicroJIG GRR-Ripper Handle Bridge Kit","description":"\u003cp\u003eSimply put, the MJ Handle Bridge improves the control of the GRR-Ripper and reduces the amount of handle adjustments.  Great for comfort and ergonomic handle positions. A useful and convienient accessory that allows you to place the handle of the GRR-Ripper exactly where it is most comfortable for your specific cut.\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847571263777,"sku":"MJG-206","price":15.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-206_base_1.webp?v=1705897011"},{"product_id":"microjig-zero-play-guide-bar-system-2-bars-2-stops","title":"MicroJIG Zero Play Guide Bar System (2 Bars \u0026 2 Stops)","description":"\u003cstyle type=\"text\/css\"\u003e\n\u003c!--\nbody {\n\tmargin-left: 0px;\n\tmargin-top: 0px;\n\tmargin-right: 0px;\n\tmargin-bottom: 0px;\n}\n--\u003e\n\u003c\/style\u003e\n\u003ch3 align=\"center\"\u003eNo More Hardwood Guides - Year Round Precision Regardless Of The Weather!\u003c\/h3\u003e\n\u003cp\u003eThe ZeroPlay Guide Bar is a “One-Touch Calibration” miter bar (9 ½” in length) that has two stacked half bars with opposing wedges that expand parallel evenly to fit the exact width of a standard miter slot for a perfect fit and smooth glide, even fits tricky Shopsmith™ or General’s miter slots. The old method of making guide bars out of wood (yes, even plywood) is a thing of the past. The \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eMicroJIG\u003c\/span\u003e Zero Play system won't swell and shrink with seasonal humidity.\u003c\/p\u003e\n\u003cp\u003eOur full ZeroPlay Guide Bar System comes with two bars and two stops. This package is great for serious woodworkers who build multiple jigs and recognize the value of a simple, exact, and trustworthy miter bar. Great for replacing your current runners or building new ZeroPlay Jigs. If you're feeling creative, use two ZeroPlay Guide bars in tandem for building larger, more elaborate, jigs as well.\u003c\/p\u003e\n\u003ch3\u003eFeatures Include:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCreate\u003c\/strong\u003e perfectly square cross cut jigs WITHOUT any trial and error set-screw adjustment along the miter bar\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasily\u003c\/strong\u003e square jig to the blade adjustment while securing through the top of the sled - Top Down Installation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e small cut-off jig easy to carry and store, or build large jig with ZeroPlay Guide Bars in tendon with custom spacing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplace \u003c\/strong\u003eworn and warped wood runners and aluminum bars that can be a hassle to calibrate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetro-Fit \u003c\/strong\u003eyour existing cross-cut jigs for improved precision\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccurately\u003c\/strong\u003e check alignment of saw blade to the miter slot with a dial-indicator (not included)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e your own unique jig or jigs with included plan\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZeroPlay Stops \u003c\/strong\u003eserve as an anchor for your clamping devices within the miter slot – shop build clamp plan included\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e table saw coving fence with the ZeroPlay Stop\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZeroPlay Stops\u003c\/strong\u003e limit the travel distance for specialty jig\u003c\/p\u003e\n\u003ch3 align=\"center\"\u003e\u003cstrong\u003eClick \u003ca href=\"..\/PDF\/MicroJigZPS.pdf\"\u003ehere\u003c\/a\u003e to read the complete WOOD Magazine review.\u003c\/strong\u003e\u003c\/h3\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847571394849,"sku":"MJG-ZPS","price":42.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-zps_base.webp?v=1705897022"},{"product_id":"micro-jig-grr-rip-smart-hook-push-block","title":"MicroJIG GRR-RIP Smart Hook Push Block","description":"\u003cp\u003e\u003cstrong\u003eGRR-RIP BLOCK - The Smart Choice For Safety In Your Shop!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Micro Jig GRR-RIP BLOCK features the innovative Green GRR-RIP nonslip pad and Smart Gravity Heel to give you total control over your workpiece. GRR-RRIP Block's drop-down heel hooks are there when you need them and instantly retract when you don't. GRR-RIP BLOCK gives you improved control for freehand routing while keeping your hands clear and away from the spinning router bit. We recommend adding the optional MJ Deflector\/Connector accessory (Item: MJG-208) for the ultimate protection against flying debris.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Use With:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJointers\u003c\/li\u003e\n\u003cli\u003eBand Saws\u003c\/li\u003e\n\u003cli\u003eRouter Tables\u003c\/li\u003e\n\u003cli\u003eShapers\u003c\/li\u003e\n\u003cli\u003eTable Saws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMore features of the GRR-RIP Block include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReversible ergonomic handle is angled for all-day woodworking comfort\u003c\/li\u003e\n\u003cli\u003eUnique Green GRR-RIP ® nonslip pad has a super-grip on your material\u003c\/li\u003e\n\u003cli\u003eGravity actuated hooks drop down automatically to grab the end of a board\u003c\/li\u003e\n\u003cli\u003eHooks instantly retract when the pushblock grips a material surface\u003c\/li\u003e\n\u003cli\u003e90° flip guide for veneering or resawing on your bandsaw\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847571853601,"sku":"MJG-201","price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-201_add-5.webp?v=1742996662"},{"product_id":"micro-jig-grr-ripper-gravity-heel-kit","title":"MicroJIG GRR-Ripper Gravity Heel Kit","description":"\u003cp\u003e\u003cstrong\u003eMicro Jig GRR-Ripper Gravity Heel Kit: Save your Double-A's\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eThe new Gravity Heel Kit for Micro Jig's GRR-Ripper (item: MJG-200) works so well you'd think it ran on batteries. This device allows a seamless transition for your GRR-Ripper from flat pushing block to a rear-pressure pushing stick when working at the table saw, router table, bandsaw or the jointer. The heel drops into place when you need it, then lifts away when you don't.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eFully adjustable from 0-1\", this gravity operated heel accessory has been designed to double as a sacrificial component to your GRR-Ripper if you so need, so feel free to use it as a backing block when cutting end grain joints to prevent tear-out.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eThe new Gravity Heel virtually eliminates tear-out and increases control and stability when feeding short or long stock on the table saw. It provides a secure backing on routing operations preventing blowout and can also be used as a template for repeat routing. The Gravity Heel is perfect for use with long stock on jointers. The Gravity Heel is there when you need it and gets out of the way when you don't.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003e5 Gravity Heels\u003c\/li\u003e\n\u003cli\u003e2 Heel Spacers\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware to fit any existing GRR-Ripper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUses in your shop:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eUse with any existing GRR-Ripper to improve safety and cut quality at the table saw\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847583093025,"sku":"MJG-199","price":16.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-199_base.webp?v=1705898460"},{"product_id":"microjig-microdial-tapering-jig-table-saw-router-table","title":"MicroJIG Microdial Tapering Jig - Table Saw \u0026 Router Table","description":"\u003ch3\u003ePrecision Tappered Cuts On Your Table Saw Or Router Table\u003c\/h3\u003e\n\u003cp\u003eTables and chairs are just a few of the fine furniture projects that require tapered legs and tops. But most of us have been trained to set up our table saw to achieve perfectly straight, non-tapered cuts. Fortunately, a tapered cut is just a straight cut that is on an angle.\u003c\/p\u003e\n\u003cp\u003eAdjustable style jigs are built with two straight fences attached in the back by a pivoting hinge which allows you to make different angled cuts. When using this style of taper jig your material rests against a stop block in the back and is not secured to your fixture. This requires you to push your jig and material through the cut while simultaneously applying side pressure to hold your stock against the jig, not an ideal scenario. And forget making narrow tapered furniture legs with this style of jig, your fingers just can't push and hold the stock and be far enough away from the saw blade to make this type of cut safely.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Micro Jig Microdial Taper jig takes tapered cuts to a whole new level of safety, accuracy, and speed. Now you can cut tapers with surgical precision using the intuitive COLORMATCH system which ensures the angle of your taper to 1\/8th of a degree (incrementally up to 10 degrees) so you can work with precision.\u003c\/li\u003e\n\u003cli\u003eThe built-in MEMORYLOCK technology maintains two independent stops so you can switch quickly and easily between two tapers on a single workpiece and work faster.\u003c\/li\u003e\n\u003cli\u003eAnd that’s just the start; the Microdial's versatile design coupled with the GRR-Ripper's control and protection allows you to feed table legs in a whole new way. By using the precision gauge, you can accurately create unique and uncommon table legs with up to 8 tapered sides. Combine the Microdial Tapering Jig with 1 or 2 \u003ca href=\"https:\/\/infinitytools.mom\/products\/micro-jig-grr-ripper-advanced-model-200?_pos=1\u0026amp;_sid=2accdda5f\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eGRR-Ripper Advanced Model 200's\u003c\/a\u003e to craft impeccably tapered legs. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe MICRODIAL Tapering Jig gives you the ultimate precision when cutting tapered panels on the table saw too. Perfect for tapering large panels for table tops, small tapered panels for table aprons or lamps, and even making unique tapered pepper mills.\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847583453473,"sku":"MJG-198","price":129.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/MJG-198_c.jpg?v=1711637139"},{"product_id":"microjig-matchfit-dovetail-clamps-with-infinity-dovetail-router-bit","title":"MicroJIG MATCHFIT Dovetail Clamps with Infinity Dovetail Router Bit","description":"\u003cp\u003e\u003cstrong\u003eMATCHFIT Dovetail Clamps – let your imagination run wild!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe breakthrough dovetail clamp arm design gives you the freedom to create your own track grooves using our 14° dovetail router bit to clamp virtually anywhere.\u003c\/p\u003e\n\u003cp\u003eExert versatile clamping pressure without interfering with the operation by containing the MATCHFIT Dovetail Clamp head arm within the dovetail groove. It expands creative freedom to build extension fences, tables, workspaces, and personalized track systems. You have to see it to appreciate all of the possibilities.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClamping Range: 0 – 5.25” (0 – 133mm)\u003c\/li\u003e\n\u003cli\u003eClamp Pressure: 595 lbs open at 4”\u003cbr\u003e(270 kg open at 100mm)\u003c\/li\u003e\n\u003cli\u003eJaw Depth: 2.375” (60mm)\u003c\/li\u003e\n\u003cli\u003eMinimum Dovetail Slot Length: 3.75” (95mm)\u003c\/li\u003e\n\u003cli\u003eDovetail Profile: 0.5” by 14º\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eSet 100-549 includes the Infinity Tools 1\/2\" shank x 14° dovetail router bit\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847597412641,"sku":"100-549","price":64.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/100-549_base_2_fb5bc5bd-0ddf-4d3b-8ebc-e932640272cd.webp?v=1723750285"},{"product_id":"microjig-matchfit-dovetail-clamps","title":"MicroJIG MATCHFIT Dovetail Clamps","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eIf you make your jigs and fixtures, you've probably dealt with T-Track. T-Track is great, but it's not always immediately available, it isn't cheap, and it doesn't always suit the situation (just run into it with an expensive router bit if you need proof). Enter \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eMicroJIG\u003c\/span\u003e's MATCHFIT dovetail-slot jig, fixture, and clamping system. MATCHFIT is comprised of various hardware and specialized clamps designed to slide into a 14°, 1\/2\" dovetail slot making any surface a clamping surface. Any 14°, 1\/2\" dovetail bit can be used with the hardware and clamps, but the dovetail slot created by their specialized bit is as strong as t-track and is more stable and easier to cut than slots created by t-slot bits. With the MATCHFIT system, pretty much any jig, clamping apparatus, or sled can be created on the fly.\u003c\/p\u003e\n\u003cp\u003eMATCHFIT Dovetail Clamps – the only clamps as free as your creativity.\u003c\/p\u003e\n\u003cp\u003eThe breakthrough dovetail clamp arm design gives you the freedom to create your own track grooves using our 14° dovetail router bit to clamp virtually anywhere.\u003c\/p\u003e\n\u003cp\u003eExert versatile clamping pressure without interfering with the operation by containing the MATCHFIT Dovetail Clamp head arm within the dovetail groove. It expands creative freedom to build extension fences, tables, workspaces, and personalized track systems. You have to see it to appreciate all of the possibilities.\u003c\/p\u003e\n\u003cp\u003eClamping Range: 0 – 5.25” (0 – 133mm) \u003cbr\u003eClamp Pressure: 595 lbs open at 4” \u003cbr\u003e(270 kg open at 100mm) \u003cbr\u003eJaw Depth: 2.375” (60mm) \u003cbr\u003eMinimum Dovetail Slot Length: 3.75” (95mm) \u003cbr\u003eDovetail Profile: 0.5” by 14º \u003cbr\u003eSet 100-549 below includes our 14° dovetail bit, item 18-628\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847612518689,"sku":"100-548","price":49.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/100-548_base_1.webp?v=1705899336"},{"product_id":"microjig-matchfit-dado-stop","title":"MicroJIG MATCHFIT Dado Stop","description":"\u003ch2\u003eIngenious Product for Flawless Dadoes without Measuring!\u003c\/h2\u003e\n\n\u003cp\u003eSimple and easy to use, the MATCHFIT Dado Stop sets the shoulders of your dado using the actual part that will be fitted in the dado for a perfect fit without measuring or test cuts. No hassles, no tricky measurements, just perfect-fitting dado cuts.\u003c\/p\u003e\n\n\u003cp\u003eUsing the MatchFit Dado Stop is simple. Use a sample of the piece that will fit into the dado to set the position of the legs of the dado stop. This defines the outside shoulders of your dado. Make two cuts, then clear away the waste in between for a perfect, gap-free joint.\u003c\/p\u003e\n\n\u003cp\u003eYou can also use the Dado Stop as a crosscut stop to make repetitive cuts on multiple workpieces for identical lengths. The precise 3” length allows you to accurately set the rip fence position for repeatable, accurate cuts quickly and easily.\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847613534497,"sku":"MJG-MDS","price":25.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-mds_base_1_71d24ac1-6204-4d1f-b97b-1dab0776b995.webp?v=1710436437"},{"product_id":"microjig-matchfit-setup-gauge","title":"MicroJIG MATCHFIT Setup Gauge","description":"\u003cp align=\"center\" style=\"text-align: left;\"\u003e\u003cstrong\u003eAn Ingenious Product for Flawless Dadoes without Measuring!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSimple and easy to use, the MATCHFIT Dado Stop sets the shoulders of your dado using the actual part that will be fitted in the dado for a perfect fit without measuring or test cuts. No hassles, no tricky measurements, just perfect-fitting dado cuts.\u003c\/p\u003e\n\u003cp\u003eUsing the MATCHFIT Dado Stop is simple. Use a sample of the piece that will fit into the dado to set the position of the legs of the dado stop. This defines the outside shoulders of your dado. Make two cuts, then clear away the waste in between for a perfect, gap-free joint.\u003c\/p\u003e\n\u003cp\u003eYou can also use the Dado Stop as a crosscut stop to make repetitive cuts on multiple workpieces for identical lengths. The precise 3” length allows you to accurately set the rip fence position for repeatable, accurate cuts quickly and easily.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMake dado cuts even easier when you pick up the MATCHFIT Setup Gauge (item MDS-211)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MATCHFIT Setup Gauge works in conjunction with the Dado Stop to make setting the position of the dado arms even quicker. It also allows you to set the perfect height for clearance slots and dovetail grooves when creating tracks for Matchfit Dovetail clamps.\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847614615841,"sku":"MJG-211","price":16.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/MJG-211.webp?v=1710436389"},{"product_id":"microjig-matchfit-dado-stop-pro-package","title":"MicroJIG MATCHFIT Dado Stop Pro Package","description":"\u003cp align=\"center\" style=\"text-align: left;\"\u003e\u003cstrong\u003eAn Ingenious Product for Flawless Dadoes without Measuring!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSimple and easy to use, the MATCHFIT Dado Stop sets the shoulders of your dado using the actual part that will be fitted in the dado for a perfect fit without measuring or test cuts. No hassles, no tricky measurements, just perfect-fitting dado cuts.\u003c\/p\u003e\n\u003cp\u003eUsing the MATCHFIT Dado Stop is simple. Use a sample of the piece that will fit into the dado to set the position of the legs of the dado stop. This defines the outside shoulders of your dado. Make two cuts, then clear away the waste in between for a perfect, gap-free joint.\u003c\/p\u003e\n\u003cp\u003eYou can also use the Dado Stop as a crosscut stop to make repetitive cuts on multiple workpieces for identical lengths. The precise 3” length allows you to accurately set the rip fence position for repeatable, accurate cuts quickly and easily.\u003c\/p\u003e\n\u003ch4\u003eMatchfit Dado Stop Pro Package (MF100) includes one of each:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cspan\u003eMicroJIG\u003c\/span\u003e MATCHFIT Dado Stop\u003c\/li\u003e\n\u003cli\u003eMATCHFIT Dovetail Clamp\u003c\/li\u003e\n\u003cli\u003eMATCHFIT Setup Gauge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMATCHFIT Dado Stop\u003c\/h4\u003e\n\u003cp\u003eSimple and easy to use, the MATCHFIT Dado Stop sets the shoulders of your dado using the actual part that will be fitted in the dado for a perfect fit without measuring or test cuts. No hassles, no tricky measurements, just perfect-fitting dado cuts.\u003c\/p\u003e\n\u003cp\u003eUsing the MATCHFIT Dado Stop is simple. Use a sample of the piece that will fit into the dado to set the position of the legs of the dado stop. This defines the outside shoulders of your dado. Make two cuts, then clear away the waste in between for a perfect, gap-free joint.\u003c\/p\u003e\n\u003cp\u003eYou can also use the Dado Stop as a crosscut stop to make repetitive cuts on multiple workpieces for identical lengths. The precise 3” length allows you to accurately set the rip fence position for repeatable, accurate cuts quickly and easily.\u003c\/p\u003e\n\u003ch4\u003eMATCHFIT Setup Gauge\u003c\/h4\u003e\n\u003cp\u003eThe MATCHFIT Setup Gauge works in conjunction with the Dado Stop to make setting the position of the dado arms even quicker. It also allows you to set the perfect height for clearance slots and dovetail grooves when creating tracks for Matchfit Dovetail clamps.\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847636013345,"sku":"MJG-212","price":64.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-212_01_2.webp?v=1705900912"},{"product_id":"microjig-matchfit-4-pc-x-pad-accessory-kit","title":"MicroJIG MATCHFIT 4-Pc. X-Pad Accessory Kit","description":"\u003cp\u003eIf you make your jigs and fixtures, you've probably dealt with T-Track. T-Track is great, but it's not always immediately available, it isn't cheap, and it doesn't always suit the situation (just run into it with an expensive router bit if you need proof). Enter \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eMicroJIG\u003c\/span\u003e's MATCHFIT dovetail-slot jig, fixture, and clamping system. MATCHFIT is comprised of various hardware and specialized clamps designed to slide into a 14°, 1\/2\" dovetail slot making any surface a clamping surface. Any 14°, 1\/2\" dovetail bit can be used with the hardware and clamps, but the dovetail slot created by their specialized bit is as strong as t-track and is more stable and easier to cut than slots created by t-slot bits. With the MATCHFIT system, pretty much any jig, clamping apparatus, or sled can be created on the fly.\u003c\/p\u003e\n\u003cp\u003eMATCHFIT X-Pads 4-Pack (MJG-223) - The X-Pads allow the dovetail clamps to create downward and lateral pressure thanks to the 60° stabilizing edge. They also have specialized crosshatching that allows clamping of round objects and pressure transfer on oddly shaped workpieces to prevent slippage. The 4-Pack will enable you to replace damaged pads or upgrade your standard MATCHFIT dovetail clamps.\u003cbr\u003e\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847643287841,"sku":"MJG-223","price":15.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-223_feed_750x750_84b6dbdd-e09d-4c20-90ee-72fbe36fb3e6.webp?v=1705902052"},{"product_id":"microjig-matchfit-dovetail-clamp-ap","title":"MicroJIG MATCHFIT Dovetail Clamp AP","description":"\u003cp\u003eIf you make your jigs and fixtures, you've probably dealt with T-Track. T-Track is great, but it's not always immediately available, it isn't cheap, and it doesn't always suit the situation (just run into it with an expensive router bit if you need proof). Enter \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eMicroJIG\u003c\/span\u003e's MATCHFIT dovetail-slot jig, fixture, and clamping system. MATCHFIT is comprised of various hardware and specialized clamps designed to slide into a 14°, 1\/2\" dovetail slot making any surface a clamping surface. Any 14°, 1\/2\" dovetail bit can be used with the hardware and clamps, but the dovetail slot created by their specialized bit is as strong as t-track and is more stable and easier to cut than slots created by t-slot bits. With the MATCHFIT system, pretty much any jig, clamping apparatus, or sled can be created on the fly.\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMATCHFIT Dovetail Clamp AP (MJG-221) - \u003cmeta charset=\"utf-8\"\u003eMicroJIG's latest Dovetail Clamp. It has a larger clamp capacity, comes standard with an X-Pad foot, and has an Anti-Pivot Spring that keeps the clamp arm from dropping during repetitive clamping operations.\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847651709217,"sku":"MJG-221","price":34.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-221_feed_crop_750x750_efa62632-bacb-402e-9ed3-dc86a8c887e4.webp?v=1705902051"},{"product_id":"microjig-matchfit-dovetail-hardware-variety-pack","title":"MicroJIG MATCHFIT Dovetail Hardware Variety Pack","description":"\u003cp\u003eIf you make your jigs and fixtures, you've probably dealt with T-Track. T-Track is great, but it's not always immediately available, it isn't cheap, and it doesn't always suit the situation (just run into it with an expensive router bit if you need proof). Enter \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eMicroJIG\u003c\/span\u003e's MATCHFIT dovetail-slot jig, fixture, and clamping system. MATCHFIT is comprised of various hardware and specialized clamps designed to slide into a 14°, 1\/2\" dovetail slot making any surface a clamping surface. Any 14°, 1\/2\" dovetail bit can be used with the hardware and clamps, but the dovetail slot created by their specialized bit is as strong as t-track and is more stable and easier to cut than slots created by t-slot bits. With the MATCHFIT system, pretty much any jig, clamping apparatus, or sled can be created on the fly.\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMATCHFIT Dovetail Hardware Variety Pack (MJG-233) \u003c\/strong\u003e- An entire system designed to give you all the functionality of t-track and t-track accessories at a fraction of the cost.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 10-32 x 1-1\/2” Dovetail Track Screws\u003c\/li\u003e\n\u003cli\u003e(2) 10-32 x 1” Dovetail Track Screws\u003c\/li\u003e\n\u003cli\u003e(2) 10-32 Female Dovetail Track Nut\u003c\/li\u003e\n\u003cli\u003e(2) 10-32 Wing Knobs\u003c\/li\u003e\n\u003cli\u003e(2) 10-32 Round Knobs\u003c\/li\u003e\n\u003cli\u003e(2) Nylon Shoulder Washers\u003c\/li\u003e\n\u003cli\u003e(2) 10-32 x 3\/4\" PH Screws\u003c\/li\u003e\n\u003cli\u003e(2) #10 Flat Washers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847655477537,"sku":"MJG-233","price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-233_feed_750x750_51e1b10b-e832-4481-ba58-9111ccbfabd5.webp?v=1705902057"},{"product_id":"microjig-matchfit-dovetail-clamp-pro","title":"MicroJIG MATCHFIT Dovetail Clamp Pro","description":"\u003cp\u003eIf you make your jigs and fixtures, you've probably dealt with T-Track. T-Track is great, but it's not always immediately available, it isn't cheap, and it doesn't always suit the situation (just run into it with an expensive router bit if you need proof). Enter \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eMicroJIG\u003c\/span\u003e's MATCHFIT dovetail-slot jig, fixture, and clamping system. MATCHFIT is comprised of various hardware and specialized clamps designed to slide into a 14°, 1\/2\" dovetail slot making any surface a clamping surface. Any 14°, 1\/2\" dovetail bit can be used with the hardware and clamps, but the dovetail slot created by their specialized bit is as strong as t-track and is more stable and easier to cut than slots created by t-slot bits. With the MATCHFIT system, pretty much any jig, clamping apparatus, or sled can be created on the fly.\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMATCHFIT Hardware Packs — open up even more opportunities for jig creation.\u003c\/p\u003e\n\u003cp\u003eMATCHFIT Dovetail Clamp Pro (MJG-231) - Everything you need to create your own tracks on virtually any surface. Make every inch of your shop more functional.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Standard Dovetail Clamps\u003c\/li\u003e\n\u003cli\u003e(1) Setup Gauge\u003c\/li\u003e\n\u003cli\u003e(1) 1\/2\" 14° Dovetail Router Bit (1\/2\" Shank)\u003c\/li\u003e\n\u003cli\u003e(1) Dovetail Clamp Pro Manual\u003c\/li\u003e\n\u003cli\u003e(1) Dovetail Hardware Variety Pack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847658361121,"sku":"MJG-231","price":115.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-231_feed_750x750_33855a56-03dd-47c4-a8f0-c80158fb63e8.webp?v=1705902054"},{"product_id":"microjig-matchfit-dovetail-bit-with-1-2-shank","title":"MicroJIG MATCHFIT 1\/2\" Shank Dovetail Router Bit","description":"\u003cp\u003eIf you make your jigs and fixtures, you've probably dealt with T-Track. T-Track is great, but it's not always immediately available, it isn't cheap, and it doesn't always suit the situation (just run into it with an expensive router bit if you need proof). Enter \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eMicroJIG\u003c\/span\u003e's MATCHFIT dovetail-slot jig, fixture, and clamping system. MATCHFIT is comprised of various hardware and specialized clamps designed to slide into a 14°, 1\/2\" dovetail slot making any surface a clamping surface. Any 14°, 1\/2\" dovetail bit can be used with the hardware and clamps, but the dovetail slot created by their specialized bit is as strong as t-track and is more stable and easier to cut than slots created by t-slot bits. With the MATCHFIT system, pretty much any jig, clamping apparatus, or sled can be created on the fly.\u003c\/p\u003e\n\u003cp\u003eSpecialized MATCHFIT Dovetail Bit (MJG-213) — ideally suited to rout clamping slots. Standard 14°, 1\/2\" dovetail bits will work, but this bit leaves a 1\/32\" round-over relief at the bottom of the slot to strengthen the walls of the slot and allow the clamps and hardware to slide more smoothly. It also creates a 1\/16\" relief at the top of the slot to prevent tearout and the sort of binding that could compromise the structural integrity of the groove. The MGJ-213 Dovetail bit also has markings that show you exactly where to position the bit for the perfect depth of cut.\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847660982561,"sku":"MJG-213","price":35.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-213_feed_crop_750x750_f9db4f5b-0da8-42c5-ab3e-d6817c830e4b.webp?v=1705902049"},{"product_id":"microjig-zeroplay-360-sled-kit-w-matchfit-dovetail-hardware","title":"MicroJIG ZEROPLAY 360 Sled Kit w\/ MATCHFIT Dovetail Hardware","description":"\u003cp\u003eIf you make your jigs and fixtures, you've probably dealt with T-Track. T-Track is great, but it's not always immediately available, it isn't cheap, and it doesn't always suit the situation (just run into it with an expensive router bit if you need proof). Enter MicroJIG's MATCHFIT dovetail-slot jig, fixture, and clamping system. MATCHFIT is comprised of various hardware and specialized clamps designed to slide into a 14°, 1\/2\" dovetail slot making any surface a clamping surface. Any 14°, 1\/2\" dovetail bit can be used with the hardware and clamps, but the dovetail slot created by their specialized bit is as strong as t-track and is more stable and easier to cut than slots created by t-slot bits. With the MATCHFIT system, pretty much any jig, clamping apparatus, or sled can be created on the fly.\u003c\/p\u003e\n\u003cp\u003eMicroJIG ZEROPLAY 360 Sled Kit w\/ MATCHFIT Dovetail Hardware (MJG-235) - Combines the ease and accuracy of ZEROPLAY Miter Bars with the versatility of MATCHFIT Dovetail Hardware. Perfect for creating customized table saw and router table sleds.\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847661080865,"sku":"MJG-235","price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-235_feed_crop_750x750_92770a14-458b-4769-9923-9976bf322a35.webp?v=1723751437"},{"product_id":"microjig-bladeclean-blade-bit-cleaning-system","title":"MicroJIG BladeClean Blade \u0026 Bit Cleaning System","description":"\u003cp\u003e\u003cstrong\u003eProtect Your Bits \u0026amp; Blades - No Mess, No Fuss!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe BladeClean Blade and Bit Cleaning System by MicroJIG is the quickest, safest, and most enjoyable way to clean your saw blades and router bits. The all-in-one kit is compatible with saw blades (circular saw, table saw and miter saw blades) 7\" up to 12\" in diameter. The system is also set up to make cleaning router bits (1\/4”, 1\/2”, 6mm, 8mm and 12mm shank sizes) with the same ease.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThe System includes:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBladeClean cleaning well\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMagnetic handle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eWire brush\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAl₂O₃ cleaning discs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRotary tool mandrel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eCleaning pitch and resin from blades and bits has historically been a messy job that requires storing cleaning liquid. The BladeClean system keeps everything tidy and contained saving time, money and hassle. BladeClean seals in liquid so it can be stored away for later use. You’ll already be set up the next time you need to clean a blade or bit. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe included magnetic handle attaches to your saw blade, keeping your hands away front the cleaning solution, and lets you avoid handling a slippery saw blade. No need to use a wire brush on the blade teeth. The replaceable scouring pad (that remains in the bottom of the well) is uniquely suited to reach every nook and cranny of your saw blade at once. Our testing shows that the average woodworker will get several hundred cleanings before needing to replace the pad. Clean an entire side of the blade in a single motion. You can use your preferred cleaner, including Boeshield Blade \u0026amp; Bit Cleaner, Simple Green, Fabuloso, Pinesol, or whatever you like. No need for harsh solvents and chemicals.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe router bit holder lets you soak and clean up to five bits in record time using the included scouring discs. Compatible with 1\/4”, 1\/2”, 6mm, 8mm, and 12mm shank sizes. We recommend removing bearings from bits before submerging them in the cleaning solution as many common household cleaners contain degreaser and can affect the bearing’s performance.\u003c\/span\u003e\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847662424353,"sku":"101-422","price":119.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/61961303d2e01f6008c1f2af_bladeclean_web-_0004_layer_0_1_04859813-933e-4779-84a7-8af1f4ff07ff.webp?v=1721748951"},{"product_id":"microjig-fitfinder","title":"MicroJIG FITFINDER 1\/2 Gauge","description":"\u003cstyle\u003e#html-body [data-pb-style=TT30C1E]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}\u003c\/style\u003e\n\u003cdiv data-content-type=\"row\" data-appearance=\"contained\" data-element=\"main\"\u003e\n\u003cdiv data-enable-parallax=\"0\" data-parallax-speed=\"0.5\" data-background-images=\"{}\" data-background-type=\"image\" data-video-loop=\"true\" data-video-play-only-visible=\"true\" data-video-lazy-load=\"true\" data-video-fallback-src=\"\" data-element=\"inner\" data-pb-style=\"TT30C1E\"\u003e\n\u003cdiv data-content-type=\"text\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp id=\"BMFEJUP\"\u003e\u003cstrong\u003eDoes the Job of Several Tools, and Does It Better!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FITFINDER 1\/2 Gauge is more than just a bit and blade setup assistant and certainly more than a mere center finder. The tool gives you the dead center of stock up to three inches thick, then allows you to lock in that measurement and take it to bits and blades for exact height adjustment, machine fences for precise fence adjustment, turning blanks to mark the center of round or oddly shaped stock, or simply use it to mark the center of the stock itself.\u003c\/p\u003e\n\u003cp\u003eSimply slide your stock under the FITFINDER’s foot marked “P2”, lock the knobs and you will have your center. You can now transfer that perfect half measurement wherever you need it using the foot marked “P3”. No squinting, no numbers, no worrying about parallaxes, no muss, and no fuss.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandles Stock Up to 3\" Thick – Accurately finds and transfers center measurements on thicker material that standard center finders can't handle.\u003c\/li\u003e\n\u003cli\u003eCountless Uses\n\u003cul\u003e\n\u003cli\u003eUse it at the router table and table saw to set bit height and fence positioning\u003c\/li\u003e\n\u003cli\u003eGreatly simplifies the setup of router bits that require multiple reference points such as edge banding bits\u003c\/li\u003e\n\u003cli\u003ePosition your bandsaw fence for resawing material without measuring, marking, or eyeballing\u003c\/li\u003e\n\u003cli\u003ePerfect for round, (non-square) rectangles, and oddly-shaped stock, too — like finding the center of tricky turning blanks\u003c\/li\u003e\n\u003cli\u003eMaybe you just need to mark the center of your stock? Great! It does that, too!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eRare Earth Magnets on Base – help keep the jig stead for hands-free use on machines with ferrous table surfaces.\u003c\/li\u003e\n\u003cli\u003eFool-Proof Use – Of course, it comes with instructions, but we have our doubts that you will need them.\u003c\/li\u003e\n\u003cli\u003eAn excellent complement to \u003ca rel=\"noopener\" href=\"https:\/\/infinitytools.mom\/products\/microjig-matchfit-dado-stop?_pos=1\u0026amp;_sid=75ece68a0\u0026amp;_ss=r\" target=\"_blank\"\u003eMicroJIG MATCHFIT Dado Stop\u003c\/a\u003e for cutting perfect half-lap bridle joints.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847663178017,"sku":"MJG-FF1","price":34.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/img_8872_750_callouts.webp?v=1712774732"},{"product_id":"microjig-steelpro-kerf-splitters-1","title":"MicroJIG Kerf Splitter Steel PRO Kits (SP-2 \u0026 SP-2TK)","description":"\u003cp\u003eThe \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eMicroJIG\u003c\/span\u003e Splitter SteelPro greatly improves safety by reducing the occurrence of kickback from both sides of the saw blade. The double-splitter technique offers a unique approach to table saw safety. By placing two splitters back-to-back behind the saw blade, the SteelPRO System allows the user to offset one splitter towards the fence to control the keeper-piece and offset the other splitter away from the fence to control the off-cut piece. The MJ Splitter SteelPRO System is available for 1\/8” kerf saw blades and thin kerf saw blades. The SteelPRO System can be easily installed into a Zero Clearance Throat plate on most table saws. Installation is so simple, it´s foolproof.\u003c\/p\u003e\n\u003cp\u003eThe SteelPRO uses a stainless steel core coated with high density plastic for significantly improved durability and resilience.\u003c\/p\u003e\n\u003cp\u003eThis new splitter system utilizes a patented \"Automatic Kerf Keeper”. The Kerf Keeper is a separated tab installed behind one of the SteelPRO Splitter inserts that is automatically ejected from its station once the saw kerf begins to close. A closing saw kerf posses a great danger to the user because the board may bind the saw blade and kickback. The Automatic Kerf Keeper deploys when the board pinches the Kerf Keeper and pulls it out of its position. Not only does this keep the kerf wedged open, it signals to the user the kerf is closing and the saw should be turned off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e The Full Kerf version is for 1\/8\" thick blades and the Thin Kerf version is for less than 1\/8\" kerf blades. Both are to be used when making 90° cuts only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoth Kits Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne drill guide\u003c\/li\u003e\n\u003cli\u003eOne 3\/16\" drill bit\u003c\/li\u003e\n\u003cli\u003eFour MJ Splitter SteelPRO inserts\u003c\/li\u003e\n\u003cli\u003eThree Automatic Kerf Keepers\u003c\/li\u003e\n\u003cli\u003eFive #8 x 1\/2\" washer head wood screws\u003c\/li\u003e\n\u003cli\u003eInstallation instruction sheet\u003c\/li\u003e\n\u003cli\u003eWarranty registration card\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MicroJIG","offers":[{"title":"Thin 3\/32\" Kerf (Red)","offer_id":50179529703713,"sku":"MJS-TKP","price":39.9,"currency_code":"USD","in_stock":true},{"title":"Full 1\/8\" Kerf (Blue)","offer_id":50179529736481,"sku":"MJS-FKP","price":39.9,"currency_code":"USD","in_stock":true},{"title":"Set of Both","offer_id":50179529769249,"sku":"MJS-SSS","price":75.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjs-tkp_add-1.jpg?v=1723735850"},{"product_id":"microjigs-cnc-workholding-kit","title":"MicroJig's CNC Workholding Kit","description":"\u003cp\u003e\u003cstrong\u003eWork Holding For Your Benchtop CNC Machine\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMicrojig's new CNC Workholding Kit operates in tandem with dovetail ways milled into your CNC's spoil board.  The hold downs in this kit will give you many options for how to grip your subject boards as your automated CNC does the work.  Let your imagination be your guide as you mix and match the various components in the kit for one-off work holding, or even for fast changes between parts when you're cutting multiples.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul role=\"list\"\u003e\n\u003cli\u003eProvides multiple secure clamping options for virtually all benchtop CNC needs.\u003c\/li\u003e\n\u003cli\u003eWorks with most sizes, models, and brands of benchtop CNC machines.\u003c\/li\u003e\n\u003cli\u003eNo tools required for most set ups.\u003c\/li\u003e\n\u003cli\u003eHold parts along the edges, leaving the top of the part free for machining.\u003c\/li\u003e\n\u003cli\u003eSecure parts from the top when working inside a larger blank.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":50265730384161,"sku":"MJG-215","price":119.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/beauty.jpg?v=1725542119"},{"product_id":"microjig-matchfit-grr-rip-clamps-pair","title":"MicroJig MatchFit Grr-Rip Clamps, (Pair)","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eClamp Anywhere to Craft Everywhere.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eExperience unmatched versatility and power with the MATCHFIT Grr-rip Clamp, designed to work seamlessly in any 1\/2\", 14-degree groove you can cut. With easy one-handed operation, apply up to 150 pounds of force, while the large anti-mar pad and quick-release trigger make adjustments effortless and protect your workpieces.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Grr-rip Clamp (DCB-625QCK2) features a large, grooved anti-mar clamp pad that protects your workpieces from damage and securely holds odd shapes in two directions.\u003c\/p\u003e\n\u003cp\u003eThe quick release trigger allows instant loosening of the clamp without breaking your grip, making adjustments smooth and effortless.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Grr-rip Clamp has the speed and capacity to quickly create jigs for end vices. The clamp offers a 6-1\/4\" (158mm) clamp capacity and a 1-7\/8\" (48mm) throat depth, making it versatile enough for a wide range of projects.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with any standard 1\/2” x 14º dovetail groove. Anywhere you can cut the groove you can use the clamp.\u003c\/li\u003e\n\u003cli\u003eCompatible with T-track and track-saw tracks.\u003c\/li\u003e\n\u003cli\u003eEasy one-handed operation, just squeeze to clamp.\u003c\/li\u003e\n\u003cli\u003eRelease Trigger loosens the clamp instantly without breaking your grip.\u003c\/li\u003e\n\u003cli\u003eLarge anti-mar clamp pad wont damage parts and is grooved to hold odd shapes horizontally and vertically.\u003c\/li\u003e\n\u003cli\u003e150 lbs clamping force.\u003c\/li\u003e\n\u003cli\u003e6.25” (158mm) clamp capacity.\u003c\/li\u003e\n\u003cli\u003e2.25” (57mm) throat depth.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":50310977093921,"sku":"MJG-220","price":44.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/MJG-220_Hero.jpg?v=1726675014"},{"product_id":"microjig-grripper-300-max","title":"MicroJIG Grripper 300 Max","description":"\u003cp\u003e\u003cstrong\u003eGRR-RIPPER MAX: The Ultimate Precision Push Block System \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTake control of your woodworking with the GRR-RIPPER MAX, the most versatile and advanced push block system on the market. Whether you're a hobbyist or a professional, this premium tool delivers unmatched precision, safety, and control for all your table saw, router table, jointer, and bandsaw projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnparalleled Safety: Protect your hands with advanced, adjustable components that keep you far from the blade.\u003c\/li\u003e\n\u003cli\u003ePrecision Beyond Compare: Cut with confidence thanks to exact measurements and control, ensuring flawless results every time.\u003c\/li\u003e\n\u003cli\u003eVersatile Adjustability: Customizable design adapts to a variety of woodworking tasks, making it your go-to tool for rip cuts, crosscuts, dadoes, and more.\u003c\/li\u003e\n\u003cli\u003eSuperior Grip Power: Non-slip material ensures a firm hold on your workpieces, minimizing movement for cleaner cuts and enhanced safety.\u003c\/li\u003e\n\u003cli\u003eBuilt to Last: High-quality construction designed for durability and reliability, no matter how demanding your projects are.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose the GRR-RIPPER MAX? \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned with your safety and craftsmanship in mind, the GRR-RIPPER MAX puts you in full control of your cuts. From beginners to seasoned pros, it’s the tool you can trust for safer, more precise woodworking.\u003c\/p\u003e\n\u003cp\u003eTake your woodworking to the MAX.\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":50707326894369,"sku":"MJG-205","price":99.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/674632ed8b89d6cb7bca5ba9_GR-MAX2-800.jpg?v=1735237704"},{"product_id":"microjig-ratcheting-t-track-clamp","title":"MicroJIG Ratcheting T-Track Clamp","description":"\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003e\u003cstrong\u003eExclusive Features of the Microjig MATCHFIT Dovetail Ratchet Clamp \u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003eMicroJig's new ratcheting T-track clamp perfectly completes all of your T-track clamping needs.  From jigs, fixtures and even your track saw guides, this clamping solution has you covered!\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAnti-Pivot Spring Holds the Arm in Place\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSay goodbye to clamp arms that drop when released. The Microjig Ratchet Clamp features the exclusive “Anti-Pivot” AP Spring, which keeps the arm exactly where you set it, even when hanging upside down. This innovative design allows you to release pressure, reposition your workpiece, and reapply the clamp without ever having to adjust the arm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFast-Acting Ratchet Clamping\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSecure your materials quickly and efficiently in just three simple steps. Adjust the arm until the pad contacts the workpiece, pull the handle to increase pressure with each click, and release instantly by pressing the quick-release button. This streamlined process ensures maximum productivity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSuperior Leverage for All Users\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe long ratchet handle provides exceptional leverage, making the clamp easy to use even for those with limited hand strength or grip issues. The ratchet mechanism’s positive lock resists loosening, even during high-vibration tasks like routing or grinding.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eLarge Clamping Face for Workpiece Protection\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe oversized clamping face, equipped with a molded protective cover, prevents surface damage, ensuring your materials stay secure and unscathed during use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWorks with MatchFit Dovetail Grooves and Standard T-Tracks\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThis versatile clamp seamlessly integrates with the MatchFit Dovetail Groove, which you can create using any 1\/2\" wide, 14-degree dovetail router bit. Alternatively, use it with any standard 12mm x 8mm T-slot. Please note: this clamp is not compatible with DeWalt track saw guide rails.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCustomizable Clamp Tracks with MatchFit\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWith MatchFit, you’re free from the limitations of pre-set clamp positions. Route your own dovetail grooves on any wooden surface for unparalleled flexibility. The MatchFit Dovetail Track System offers the same functionality as T-tracks at a fraction of the cost, empowering you to create bespoke jigs and fixtures tailored to your projects.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKey Benefits of the MATCHFIT Dovetail Ratchet Clamp AP:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnti-Pivot Spring for Reliable Arm Positioning: Keeps the clamp arm pre-loaded and ready for repeated use without adjustments.\u003c\/li\u003e\n\u003cli\u003eEfficient Ratchet Mechanism: Simplifies clamping and releasing, making it perfect for high-speed workflows.\u003c\/li\u003e\n\u003cli\u003eDurability and Stability: Withstands heavy vibrations without loosening.\u003c\/li\u003e\n\u003cli\u003eProtective Clamping Surface: Safeguards your workpiece with a padded clamping face.\u003c\/li\u003e\n\u003cli\u003eUnlimited Customization: Create your own dovetail tracks anywhere you can route for unmatched versatility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWhy Choose Microjig’s Ratchet Clamp?\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTransform your workspace with a clamp designed for efficiency, precision, and adaptability. Whether you’re building jigs, securing stock, or working on intricate tasks, the Microjig MATCHFIT Dovetail Ratchet Clamp AP is the ultimate tool for enhancing your craftsmanship. Experience the freedom of a clamp that stays exactly where you need it and adapts to your every project.\u003c\/span\u003e\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":50727848804641,"sku":"MJG-222","price":49.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/64bba5384329cd9408d0ce59_ratchet-clamp-800_1.jpg?v=1735216020"},{"product_id":"microjig-matchfit-gridrouter-guide","title":"MicroJIG MATCHFIT GridRouter Guide","description":"\u003cp\u003eIntroducing the MATCHFIT Grid Router Guide by MicroJIG—a revolutionary tool that empowers woodworkers to create custom dovetail track grids with unparalleled precision and efficiency. This innovative guide simplifies the process of building versatile clamping setups, transforming any workbench or jig into a dynamic, clamping-friendly workspace.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-Indexing Design: The Grid Router Guide features a self-aligning base that ensures flawless 4-inch groove spacing without the need for measuring or marking. Simply attach it to your router, set the depth with the included 1\/4\" shank dovetail and 1\/4\" shank relief bit, and glide it across your panel to achieve a perfect grid—whether on a compact sled or a full 4x8 sheet.  \u003c\/li\u003e\n\u003cli\u003eCustomizable Clamp Tracks: With the MATCHFIT system, you're no longer confined to fixed clamp positions. Rout your own dovetail tracks on any wooden surface, allowing clamps to be positioned exactly where you need them. This flexibility offers all the functionality of traditional T-tracks but with greater adaptability and at a fraction of the cost. Amazon\u003c\/li\u003e\n\u003cli\u003eSeamless Integration: All MATCHFIT clamps are designed to slide effortlessly into any 1\/2\" x 14º dovetail groove, creating a unified clamping system that enhances efficiency and workflow in your shop.\u003c\/li\u003e\n\u003cli\u003eVersatile Application: Beyond workbenches, the Grid Router Guide is ideal for creating adjustable jigs and fixtures, enhancing the functionality of router tables, table saws, jointers, and band saws. Its design distributes clamping force evenly along the track walls, ensuring a robust and reliable hold.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: Fits routers with bases up to 7 inches in diameter. Requires a 1-3\/8″ Porter-Cable type guide bushing base.\u003c\/li\u003e\n\u003cli\u003eEase of Use: No adjustments necessary—simply set the depth and start routing. Each groove indexes from the last, eliminating the need for extra tools or complex setups.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExperience the freedom to clamp anywhere and craft everywhere with the MATCHFIT Grid Router Guide. Elevate your woodworking projects with custom clamping solutions that adapt to your unique needs, ensuring precision, safety, and efficiency in every task.\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":51066917290273,"sku":"MJG-225","price":110.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/67d43a62388873c00a946022_DT-router-guide-800.jpg?v=1742568690"},{"product_id":"microjig-fitfinder-1-2-gauge-upgrade-kit","title":"MicroJIG FITFINDER 1\/2 Gauge Upgrade Kit","description":"\u003cp\u003eEnhance your woodworking precision with the FITFINDER 1\/2 Gauge Upgrade Kit by Microjig—a comprehensive accessory designed to elevate the functionality of your existing FitFinder 1\/2 Gauge. This upgrade introduces four specialized tips, enabling accurate dimension transfers and center-finding across various woodworking applications.​ \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour Precision Tips for Versatile Use:\n\u003cul\u003e\n\u003cli\u003eInside Tip: Ideal for centering \"Negative V\" shapes like edge-banding router bits, ensuring a flush and clean fit.​ \u003c\/li\u003e\n\u003cli\u003eOutside Tip: Perfect for \"Positive V\" shapes and round parts such as drill bits; includes a slot for quick alignment of your bandsaw blade to the fence, facilitating precise center-finding during resawing.​\u003c\/li\u003e\n\u003cli\u003eMarking Wheel: A steel scribe designed to mark the 1\/2 point directly onto your material, ideal for dowel stock and precise chisel setups.​\u003c\/li\u003e\n\u003cli\u003eUp Tip: Allows setting the 1\/2 point to the underside of bits and blades, enabling precise adjustments for height and depth in your tools—essential for slotting router bits.​\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eQuick \u0026amp; Secure Tip Changes: The included P4 Adapter and mounted Allen wrench facilitate fast, seamless transitions between tasks, making complex woodworking processes simple.​\u003c\/li\u003e\n\u003cli\u003eMore Than a Center Finder: Beyond locating the center, this kit allows you to transfer measurements to set the height and depth of router bits and saw blades or align fences on table saws, drill presses, and bandsaws, eliminating guesswork and ensuring consistent, professional-grade results.​\u003c\/li\u003e\n\u003cli\u003eDesigned for Multiple Tools: Compatible with table saws, router tables, drill presses, bandsaws, edge banding bits, V-groove bits, and more, this kit integrates seamlessly into various woodworking setups.​\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: Designed to enhance the FitFinder 1\/2 Gauge (sold separately).​\u003c\/li\u003e\n\u003cli\u003eIncluded Components:\n\u003cul\u003e\n\u003cli\u003eP4 Accessory Mount​\u003c\/li\u003e\n\u003cli\u003eP5V+ Inside Tip​\u003c\/li\u003e\n\u003cli\u003eP6V- Outside Tip​\u003c\/li\u003e\n\u003cli\u003eP7 Marking Wheel​\u003c\/li\u003e\n\u003cli\u003eP8 Up Tip​\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your FitFinder 1\/2 Gauge with this accessory kit to achieve unparalleled accuracy and efficiency in your woodworking projects. Whether you're a professional craftsman or a DIY enthusiast, the FITFINDER 1\/2 Gauge Upgrade Kit is an essential addition to your toolkit. ​ \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThe FitFinder 1\/2 Gauge is sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":51066994950433,"sku":"MJG-FF2","price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/66ff1e025d4de1d5e314d839_fitfinder-upgrade-800.jpg?v=1742571234"}],"url":"https:\/\/infinitytools.mom\/collections\/micro-jig.oembed","provider":"Infinity Cutting Tools","version":"1.0","type":"link"}