{"title":"Kunz","description":"\u003ch2\u003eKunz Hand Planes — Cast Iron Bench Planes for Woodworking\u003c\/h2\u003e\n\u003cp\u003eKunz hand planes are built on a straightforward principle: precision-machined cast iron bodies, flat soles, and sharp tool-steel blades at a price point that makes quality bench plane work accessible to every woodworker. The Kunz Plus line features grey cast iron bodies that are carefully machined and ground for flatness, providing the stable, chatter-free foundation that quality hand-plane work demands.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/infinitytools.mom\/products\/kunz-plus-no-4-smoothing-plane\"\u003eKunz Plus No. 4 smoothing plane\u003c\/a\u003e is the most versatile bench plane in any shop — its 2\" blade width is ideal for final surface preparation, cleaning up glue lines, and working with the grain to achieve a finish-ready surface without sandpaper. The \u003ca href=\"https:\/\/infinitytools.mom\/products\/kunz-plus-no-5-jack-plane\"\u003eKunz Plus No. 5 jack plane\u003c\/a\u003e is the workhorse of the bench plane family, used for initial flattening, traversing, and rapid stock removal before a smoother follows. For longer boards and wide panels, the \u003ca href=\"https:\/\/infinitytools.mom\/products\/kunz-plus-no-6-fore-plane\"\u003eKunz Plus No. 6 fore plane\u003c\/a\u003e provides the extra sole length needed to bridge low spots and true a surface flat.\u003c\/p\u003e\n\u003ch3\u003eReplacement Blades \u0026amp; Starter Sets\u003c\/h3\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/infinitytools.mom\/products\/kunz-plus-bench-planes-3-pc-set\"\u003eKunz Plus 3-piece bench plane set\u003c\/a\u003e includes the No. 4, No. 5, and No. 6 together, making it a comprehensive starter collection for the hand-tool woodworker. Replacement blades are available for both the \u003ca href=\"https:\/\/infinitytools.mom\/products\/replacement-blade-for-kunz-plus-no-4-or-no-5\"\u003eNo. 4\/No. 5\u003c\/a\u003e and the \u003ca href=\"https:\/\/infinitytools.mom\/products\/replacement-blade-for-kunz-plus-no-6\"\u003eNo. 6\u003c\/a\u003e, ensuring you can maintain sharp, consistent performance without replacing the entire plane.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWear-resistant grey cast iron bodies, machined and ground flat\u003c\/li\u003e\n  \u003cli\u003eTool steel blades ground to a keen edge from the factory\u003c\/li\u003e\n  \u003cli\u003eNo. 4 smoother, No. 5 jack, and No. 6 fore plane available individually or as a set\u003c\/li\u003e\n  \u003cli\u003eReplacement blades for ongoing maintenance and performance restoration\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"kunz-plus-no-4-smoothing-plane","title":"Kunz Plus No. 4 Smoothing Plane","description":"\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"html\"\u003e\n\u003cp\u003e\u003cstrong\u003eGerman Design \u0026amp; Construction Make a Great Plane\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cp\u003eEven if you do most of your work with machines, you should have at least one useable bench plane in your shop. They are useful for all sorts of situations, especially fine tuning joinery and cleaning up the faces and edges of workpieces. These classic tools make quick work of tasks that would otherwise be difficult and require time-consuming machine setup. Infinity Tools is happy to offer three useful Kunz Plus bench planes that we believe will handle most of your planing tasks.\u003c\/p\u003e\n\u003cp\u003eThe No. 4 is perfect for final smoothing and refining of your piece's surface before sanding. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBodies manufactured from stress-relief annealed grey-cast iron\n\u003cul\u003e\n\u003cli\u003eThe soles are expertly machined to be flat and square to the cheeks\u003c\/li\u003e\n\u003cli\u003eLarge cheeks reminiscent of classic Bedrock designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eShort and stout, 1\/8\" thick plane iron\n\u003cul\u003e\n\u003cli\u003eMade from optimized tool steel, hardened to RC60-62, prolong life and edge retention\u003c\/li\u003e\n\u003cli\u003eShort length leaves more clearance for your hands at the tote and more room for frog adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eClassic Features Mingled With Novel Design Innovations\n\u003cul\u003e\n\u003cli\u003eFrog rests in a fully machined bed and can be adjusted to open or close the mouth without removing the blade, cap iron, or lever cap\u003c\/li\u003e\n\u003cli\u003eEasy frog and mouth adjustment - only one screw needs to be turned instead of three\u003c\/li\u003e\n\u003cli\u003eFrog slides in a machined channel that prevents twisting upon adjustment\u003c\/li\u003e\n\u003cli\u003eNorris-style adjuster follows the same single-screw adjustment theme as the frog with one point of both lateral and depth of adjustment of the plane iron, with little slop and minimal backlash\u003c\/li\u003e\n\u003cli\u003eBrass lever cap screw threads through the lever cap to provide pressure at both ends of the blade and cap iron (aka chip breaker) when engaged\u003c\/li\u003e\n\u003cli\u003eHollow portion of the lever cap screw slides over the protruding part of the cap iron screw, keeping all the components centrally aligned over the cup in the Norris adjuster, and capturing the cap iron screw.\u003c\/li\u003e\n\u003cli\u003eLever cap, cap iron, and plane blade function more like a single solid unit, helping to reduce chatter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Kunz","offers":[{"title":"Default Title","offer_id":46847648465185,"sku":"101-570","price":299.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/101-570_on_bench.webp?v=1705902435"},{"product_id":"replacement-blade-for-kunz-plus-no-6","title":"Kunz Replacement Blade for Kunz Plus No. 6","description":"\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"html\"\u003e\n\u003cp\u003e\u003cstrong\u003eGerman Design \u0026amp; Construction Make a Great Plane\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cp\u003eEven if you do most of your work with machines, you should have at least one useable bench plane in your shop. They are useful for all sorts of situations, especially fine tuning joinery and cleaning up the faces and edges of workpieces. These classic tools make quick work of tasks that would otherwise be difficult and require time-consuming machine setup. Infinity Tools is happy to offer three useful Kunz Plus bench planes that we believe will handle most of your planing tasks. The No. 4 is perfect for final smoothing and refining of your piece's surface before sanding. The No. 5 is called the \"Jack\" plane for a reason: it can handle jobs where the No. 4 might be a bit too small, and where the No. 6 might be overkill. The No. 6 is technically a fore plane, but it can be used like a jointer for small and medium-sized stock, which is really all most modern woodworkers will ever use it for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBodies manufactured from stress-relief annealed grey-cast iron\n\u003cul\u003e\n\u003cli\u003eThe soles are expertly machined to be flat and square to the cheeks\u003c\/li\u003e\n\u003cli\u003eLarge cheeks reminiscent of classic Bedrock designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eShort and stout, 1\/8\" thick plane iron\n\u003cul\u003e\n\u003cli\u003eMade from optimized tool steel, hardened to RC60-62, prolong life and edge retention\u003c\/li\u003e\n\u003cli\u003eShort length leaves more clearance for your hands at the tote and more room for frog adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eClassic Features Mingled With Novel Design Innovations\n\u003cul\u003e\n\u003cli\u003eFrog rests in a fully machined bed and can be adjusted to open or close the mouth without removing the blade, cap iron, or lever cap\u003c\/li\u003e\n\u003cli\u003eEasy frog and mouth adjustment - only one screw needs to be turned instead of three\u003c\/li\u003e\n\u003cli\u003eFrog slides in a machined channel that prevents twisting upon adjustment\u003c\/li\u003e\n\u003cli\u003eNorris-style adjuster follows the same single-screw adjustment theme as the frog with one point of both lateral and depth of adjustment of the plane iron, with little slop and minimal backlash\u003c\/li\u003e\n\u003cli\u003eBrass lever cap screw threads through the lever cap to provide pressure at both ends of the blade and cap iron (aka chip breaker) when engaged\u003c\/li\u003e\n\u003cli\u003eHollow portion of the lever cap screw slides over the protruding part of the cap iron screw, keeping all the components centrally aligned over the cup in the Norris adjuster, and capturing the cap iron screw.\u003c\/li\u003e\n\u003cli\u003eLever cap, cap iron, and plane blade function more like a single solid unit, helping to reduce chatter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Kunz","offers":[{"title":"Default Title","offer_id":46847656001825,"sku":"101-572BL","price":59.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/101-572bl_1kx1k_display_1.webp?v=1705902442"},{"product_id":"kunz-plus-no-6-fore-plane","title":"Kunz Plus No. 6 Fore Plane","description":"\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"html\"\u003e\n\u003cp\u003e\u003cstrong\u003eGerman Design \u0026amp; Construction Make a Great Plane\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cp\u003eEven if you do most of your work with machines, you should have at least one useable bench plane in your shop. They are useful for all sorts of situations, especially fine tuning joinery and cleaning up the faces and edges of workpieces. These classic tools make quick work of tasks that would otherwise be difficult and require time-consuming machine setup. Infinity Tools is happy to offer three useful Kunz Plus bench planes that we believe will handle most of your planing tasks. The No. 4 is perfect for final smoothing and refining of your piece's surface before sanding. The No. 5 is called the \"Jack\" plane for a reason: it can handle jobs where the No. 4 might be a bit too small, and where the No. 6 might be overkill. The No. 6 is technically a fore plane, but it can be used like a jointer for small and medium-sized stock, which is really all most modern woodworkers will ever use it for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBodies manufactured from stress-relief annealed grey-cast iron\n\u003cul\u003e\n\u003cli\u003eThe soles are expertly machined to be flat and square to the cheeks\u003c\/li\u003e\n\u003cli\u003eLarge cheeks reminiscent of classic Bedrock designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eShort and stout, 1\/8\" thick plane iron\n\u003cul\u003e\n\u003cli\u003eMade from optimized tool steel, hardened to RC60-62, prolong life and edge retention\u003c\/li\u003e\n\u003cli\u003eShort length leaves more clearance for your hands at the tote and more room for frog adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eClassic Features Mingled With Novel Design Innovations\n\u003cul\u003e\n\u003cli\u003eFrog rests in a fully machined bed and can be adjusted to open or close the mouth without removing the blade, cap iron, or lever cap\u003c\/li\u003e\n\u003cli\u003eEasy frog and mouth adjustment - only one screw needs to be turned instead of three\u003c\/li\u003e\n\u003cli\u003eFrog slides in a machined channel that prevents twisting upon adjustment\u003c\/li\u003e\n\u003cli\u003eNorris-style adjuster follows the same single-screw adjustment theme as the frog with one point of both lateral and depth of adjustment of the plane iron, with little slop and minimal backlash\u003c\/li\u003e\n\u003cli\u003eBrass lever cap screw threads through the lever cap to provide pressure at both ends of the blade and cap iron (aka chip breaker) when engaged\u003c\/li\u003e\n\u003cli\u003eHollow portion of the lever cap screw slides over the protruding part of the cap iron screw, keeping all the components centrally aligned over the cup in the Norris adjuster, and capturing the cap iron screw.\u003c\/li\u003e\n\u003cli\u003eLever cap, cap iron, and plane blade function more like a single solid unit, helping to reduce chatter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Kunz","offers":[{"title":"Default Title","offer_id":46847660458273,"sku":"101-572","price":399.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/101-570_cap_iron_removal_18914206-234f-4d6d-9154-70a3ddf7f508.jpg?v=1722634108"},{"product_id":"kunz-plus-bench-planes-3-pc-set","title":"Kunz Plus Bench Planes 3-Pc. Set","description":"\u003cp\u003e\u003cstrong\u003eGerman Design \u0026amp; Construction Make a Great Plane \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis ultimate 3-Pc. Hand Plane package; includes one each of the following; #4 Smoothing, #5 Jack and #6 Fore Plane. Save some money and get the complete package of high quality German made hand planes. \u003c\/p\u003e\n\u003cp\u003eEven if you do most of your work with machines, you should have at least one useable bench plane in your shop. They are useful for all sorts of situations, especially fine tuning joinery and cleaning up the faces and edges of workpieces. These classic tools make quick work of tasks that would otherwise be difficult and require time-consuming machine setup. Infinity Tools is happy to offer three useful Kunz Plus bench planes that we believe will handle most of your planing tasks. The No. 4 is perfect for final smoothing and refining of your piece's surface before sanding. The No. 5 is called the \"Jack\" plane for a reason: it can handle jobs where the No. 4 might be a bit too small, and where the No. 6 might be overkill. The No. 6 is technically a fore plane, but it can be used like a jointer for small and medium-sized stock, which is really all most modern woodworkers will ever use it for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBodies manufactured from stress-relief annealed grey-cast iron\n\u003cul\u003e\n\u003cli\u003eThe soles are expertly machined to be flat and square to the cheeks\u003c\/li\u003e\n\u003cli\u003eLarge cheeks reminiscent of classic Bedrock designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eShort and stout, 1\/8\" thick plane iron\n\u003cul\u003e\n\u003cli\u003eMade from optimized tool steel, hardened to RC60-62, prolong life and edge retention\u003c\/li\u003e\n\u003cli\u003eShort length leaves more clearance for your hands at the tote and more room for frog adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eClassic Features Mingled With Novel Design Innovations\n\u003cul\u003e\n\u003cli\u003eFrog rests in a fully machined bed and can be adjusted to open or close the mouth without removing the blade, cap iron, or lever cap\u003c\/li\u003e\n\u003cli\u003eEasy frog and mouth adjustment - only one screw needs to be turned instead of three Frog slides in a machined channel that prevents twisting upon adjustment\u003c\/li\u003e\n\u003cli\u003eNorris-style adjuster follows the same single-screw adjustment theme as the frog with one point of both lateral and depth of adjustment of the plane iron, with little slop and minimal backlash\u003c\/li\u003e\n\u003cli\u003eBrass lever cap screw threads through the lever cap to provide pressure at both ends of the blade and cap iron (aka chip breaker) when engaged\u003c\/li\u003e\n\u003cli\u003eHollow portion of the lever cap screw slides over the protruding part of the cap iron screw, keeping all the components centrally aligned over the cup in the Norris adjuster, and capturing the cap iron screw.\u003c\/li\u003e\n\u003cli\u003eLever cap, cap iron, and plane blade function more like a single solid unit, helping to reduce chatter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kunz","offers":[{"title":"Default Title","offer_id":46847660556577,"sku":"101-575","price":949.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/101-570g_group_on_bench_2_1.webp?v=1705902448"},{"product_id":"kunz-plus-no-5-jack-plane","title":"Kunz Plus No. 5 Jack Plane","description":"\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"html\"\u003e\n\u003cp\u003e\u003cstrong\u003eGerman Design \u0026amp; Construction Make a Great Plane\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cp\u003eEven if you do most of your work with machines, you should have at least one useable bench plane in your shop. They are useful for all sorts of situations, especially fine tuning joinery and cleaning up the faces and edges of workpieces. These classic tools make quick work of tasks that would otherwise be difficult and require time-consuming machine setup. Infinity Tools is happy to offer three useful Kunz Plus bench planes that we believe will handle most of your planing tasks. The No. 4 is perfect for final smoothing and refining of your piece's surface before sanding. The No. 5 is called the \"Jack\" plane for a reason: it can handle jobs where the No. 4 might be a bit too small, and where the No. 6 might be overkill. The No. 6 is technically a fore plane, but it can be used like a jointer for small and medium-sized stock, which is really all most modern woodworkers will ever use it for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBodies manufactured from stress-relief annealed grey-cast iron\n\u003cul\u003e\n\u003cli\u003eThe soles are expertly machined to be flat and square to the cheeks\u003c\/li\u003e\n\u003cli\u003eLarge cheeks reminiscent of classic Bedrock designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eShort and stout, 1\/8\" thick plane iron\n\u003cul\u003e\n\u003cli\u003eMade from optimized tool steel, hardened to RC60-62, prolong life and edge retention\u003c\/li\u003e\n\u003cli\u003eShort length leaves more clearance for your hands at the tote and more room for frog adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eClassic Features Mingled With Novel Design Innovations\n\u003cul\u003e\n\u003cli\u003eFrog rests in a fully machined bed and can be adjusted to open or close the mouth without removing the blade, cap iron, or lever cap\u003c\/li\u003e\n\u003cli\u003eEasy frog and mouth adjustment - only one screw needs to be turned instead of three\u003c\/li\u003e\n\u003cli\u003eFrog slides in a machined channel that prevents twisting upon adjustment\u003c\/li\u003e\n\u003cli\u003eNorris-style adjuster follows the same single-screw adjustment theme as the frog with one point of both lateral and depth of adjustment of the plane iron, with little slop and minimal backlash\u003c\/li\u003e\n\u003cli\u003eBrass lever cap screw threads through the lever cap to provide pressure at both ends of the blade and cap iron (aka chip breaker) when engaged\u003c\/li\u003e\n\u003cli\u003eHollow portion of the lever cap screw slides over the protruding part of the cap iron screw, keeping all the components centrally aligned over the cup in the Norris adjuster, and capturing the cap iron screw.\u003c\/li\u003e\n\u003cli\u003eLever cap, cap iron, and plane blade function more like a single solid unit, helping to reduce chatter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Kunz","offers":[{"title":"Default Title","offer_id":46847661703457,"sku":"101-571","price":319.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/101-571_on_bench.webp?v=1705902437"},{"product_id":"replacement-blade-for-kunz-plus-no-4-or-no-5","title":"Kunz Replacement Blade for Kunz Plus No. 4 or No. 5","description":"\u003cp\u003e\u003cstrong\u003eReplacement Blade for Kunz Plus No. 4 or No. 5\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstyle\u003e#html-body [data-pb-style=ENI32F1]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}\u003c\/style\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"contained\" data-content-type=\"row\"\u003e\n\u003cdiv data-pb-style=\"ENI32F1\" data-element=\"inner\" data-video-fallback-src=\"\" data-video-lazy-load=\"true\" data-video-play-only-visible=\"true\" data-video-loop=\"true\" data-background-type=\"image\" data-background-images=\"{}\" data-parallax-speed=\"0.5\" data-enable-parallax=\"0\"\u003e\n\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"text\"\u003e\n\u003cp\u003eEven if you do most of your work with machines, you should have at least one useable bench plane in your shop. They are useful for all sorts of situations, especially fine tuning joinery and cleaning up the faces and edges of workpieces. These classic tools make quick work of tasks that would otherwise be difficult and require time-consuming machine setup. Infinity Tools is happy to offer three useful Kunz Plus bench planes that we believe will handle most of your planing tasks. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShort and stout, 1\/8\" thick plane iron\n\u003cul\u003e\n\u003cli\u003eMade from optimized tool steel, hardened to RC60-62, prolong life and edge retention\u003c\/li\u003e\n\u003cli\u003eShort length leaves more clearance for your hands at the tote and more room for frog adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kunz","offers":[{"title":"Default Title","offer_id":46847663407393,"sku":"101-570BL","price":54.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/101-570bl_1kx1k_display.jpg?v=1722890682"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/collections\/kunz_logo.jpg?v=1719282608","url":"https:\/\/infinitytools.mom\/collections\/kunz.oembed","provider":"Infinity Cutting Tools","version":"1.0","type":"link"}