{"title":"iVac Automated Dust Collection Systems","description":"\u003ch2\u003eiVac Automated Dust Collection Systems for Hands-Free Shop Cleanup\u003c\/h2\u003e\n\u003cp\u003eiVac automated dust collection systems eliminate the need to manually switch your dust collector on and off between cuts. When you power up a connected power tool, the iVac system detects the current draw and automatically starts your dust collector — and shuts it off a few seconds after you stop the tool. The result is a cleaner shop, better dust extraction timing, and one less thing to think about at the bench.\u003c\/p\u003e\n\u003ch3\u003eiVac Switch Box vs. iVac Pro System\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiVac Switch Box\u003c\/strong\u003e is a plug-and-play solution for smaller shops. Plug your dust collector and one power tool into the box and you're done — no wiring required. It works with 115 VAC equipment rated at no more than 6 amps, making it ideal for shop vacs and single-tool setups.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eiVac Pro System\u003c\/strong\u003e is designed for larger shops running multiple power tools off one dust collector. The Pro System uses separate Pro Tool sensors and Pro Switch modules so you can mix and match tools and collectors operating at different voltages — 115 VAC or 240 VAC. If your dust collector motor draws more than 8 amps, you'll also need an \u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-contactor-115vac-trigger-10hp-capacity\"\u003eiVac Contactor rated up to 10 hp\u003c\/a\u003e to handle the load.\u003c\/p\u003e\n\u003cp\u003eExplore our full lineup of \u003ca href=\"https:\/\/infinitytools.mom\/collections\/power-tools\"\u003epower tool accessories\u003c\/a\u003e or check the \u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-8-pc-auto-dust-collection-w-contactor\"\u003eiVac 8-piece auto dust collection kit with contactor\u003c\/a\u003e to outfit an entire multi-tool shop in one purchase. For table saw and router table setups, see our \u003ca href=\"https:\/\/infinitytools.mom\/collections\/table-saw-accessories-1\"\u003etable saw accessories\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"ivac-automatic-vacuum-switch-box","title":"iVac Automatic Vacuum Switch Box","description":"\u003cp\u003eThe \u003cstrong\u003eiVac Automatic Vacuum Switch Box\u003c\/strong\u003e makes dust collection as easy as turning on your power tool. This intelligent switch box automatically powers your plug-in vacuum or dust collector \u003cem\u003eon\u003c\/em\u003e when you start your tool and \u003cem\u003eoff\u003c\/em\u003e six seconds after you stop — so you never forget to run dust collection, and you protect your lungs from harmful fine particulate. It's a smart, affordable entry point into our \u003ca href=\"https:\/\/infinitytools.mom\/collections\/ivac-automated-dust-collection\"\u003eautomated dust collection\u003c\/a\u003e range.\u003c\/p\u003e\n\n\u003ch2\u003eAutomated dust collection your lungs will thank you for\u003c\/h2\u003e\n\u003cp\u003eFine shop dust is a serious long-term health risk, and even a \"quick cut\" releases thousands of harmful particles into the air. The iVac removes the temptation to skip dust collection: turn on your tool and the vacuum starts automatically; turn it off and the vacuum runs six more seconds to clear airborne debris, then shuts down. A three-position mode switch (Auto–Off–On) also lets you run the collector continuously for cleanup.\u003c\/p\u003e\n\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eThe switch box senses when your power tool draws current and switches the dust collection system accordingly. A turn-on delay of 0.5 to 2.0 seconds helps avoid power surges, and the six-second turn-off delay clears the hose and air. It mounts easily to a wall for convenience.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor:\u003c\/strong\u003e Single-tool systems operating at 115VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum draw:\u003c\/strong\u003e No more than 6 amps (check your machine's label)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurn-on delay:\u003c\/strong\u003e 0.5–2.0 seconds (surge protection)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurn-off delay:\u003c\/strong\u003e 6 seconds (clears airborne debris)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode switch:\u003c\/strong\u003e Three positions — Auto, Off, On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Wall-mountable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cp\u003eRunning multiple tools or larger equipment? Step up to the iVac Pro System and explore our full \u003ca href=\"https:\/\/infinitytools.mom\/collections\/dust-collection\"\u003edust collection\u003c\/a\u003e range, including \u003ca href=\"https:\/\/infinitytools.mom\/collections\/dust-collection-machines\"\u003edust collection machines\u003c\/a\u003e and hoses, fittings, and accessories.\u003c\/p\u003e","brand":"iVac","offers":[{"title":"Default Title","offer_id":46847537185057,"sku":"115-100","price":69.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/115-100_base.webp?v=1705895775"},{"product_id":"ivac-pro-switch-240vac-20a","title":"iVac Pro Switch; 240Vac; 20A","description":"\u003cp\u003e\u003cstrong\u003eiVAC Automated Dust Collection - Switch (For Your Dust Collector)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eAutomated Dust Control for your Safety \u0026amp; Convenience. Used as a component of the iVAC Pro System. The iVAC Pro Switch modules are used to automatically turn on your Dust Collector or Shop Vac when you turn on a power tool plugged into an iVAC Pro Tool module such as a table saw, mitre saw, sander, etc. The dust collector will be connected to an iVAC Pro Switch module.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003eThree Modes of operation. Auto – Off – On\u003c\/li\u003e\n\u003cli\u003eFour System addresses. Programmable\u003c\/li\u003e\n\u003cli\u003eTurn On Delay\u003c\/li\u003e\n\u003cli\u003eTurn Off Time – Programmable\u003c\/li\u003e\n\u003cli\u003eMaster Reset\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003eVoltage is 240Vac\u003c\/li\u003e\n\u003cli\u003eCurrent capacity is 20Amps\u003c\/li\u003e\n\u003cli\u003eCircuit breaker is rated at 20Amps\u003c\/li\u003e\n\u003cli\u003eTypical Motor drive capability\u003cbr\u003e2HP at 240Vac\u003c\/li\u003e\n\u003cli\u003eInput power cord is 30” with the respective NEMA straight blade plug\u003c\/li\u003e\n\u003cli\u003eOutput power receptacle is the respective NEMA straight blade receptacle\u003c\/li\u003e\n\u003cli\u003eTurn ON Delay 0 or 1.5 seconds\u003c\/li\u003e\n\u003cli\u003eTurn Off Time 0, 5, 15 or 45seconds\u003c\/li\u003e\n\u003cli\u003eRange, 40’ line of sight\u003c\/li\u003e\n\u003cli\u003eMaximum ambient operating temperature, 30C\u003c\/li\u003e\n\u003cli\u003eRegulatory approval \u003cbr\u003eTUV certification to UL60950-1 and CSA 60950-\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eWe strongly recommend the use of the\u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-contactor-115vac-trigger-10hp-capacity\" target=\"_blank\"\u003e iVAC Contactor\u003c\/a\u003e for dust collectors operating on 115Vac rated over 1HP and for any dust collector over 1.5HP operating on 230Vac.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"iVac","offers":[{"title":"Default Title","offer_id":46847537414433,"sku":"115-104S","price":99.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/115-104s_base.webp?v=1705895784"},{"product_id":"ivac-pro-remote","title":"iVac Pro Remote","description":"\u003cp\u003e\u003cstrong\u003eiVAC Automated Dust Collection - Remote Switch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eThe REMOTE has an ON and an OFF button which will trigger the iVAC Pro SWITCH module in the same way as the iVAC Pro TOOL does, you set an address for the REMOTE (from 1 – 8). It comes complete with batteries and a belt clip for convenient use while in the workshop. And yes, it has FCC \u0026amp; IC certification for use in North America.\u003c\/p\u003e","brand":"iVac","offers":[{"title":"Default Title","offer_id":46847537512737,"sku":"115-106","price":45.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/115-106_feed.webp?v=1705895790"},{"product_id":"ivac-pro-switch-115vac-20a","title":"iVac Pro Switch; 115Vac; 20A","description":"\u003cp\u003e\u003cstrong\u003eiVAC Automated Dust Collection - Switch (For Your Dust Collector)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eAutomated Dust Control for your Safety \u0026amp; Convenience. Used as a component of the iVAC Pro System. The iVAC Pro Switch modules are used to automatically turn on your Dust Collector or Shop Vac when you turn on a power tool plugged into an iVAC Pro Tool module such as a table saw, mitre saw, sander, etc. The dust collector will be connected to an iVAC Pro Switch module.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003eThree Modes of operation. Auto – Off – On\u003c\/li\u003e\n\u003cli\u003eFour System addresses. Programmable\u003c\/li\u003e\n\u003cli\u003eTurn On Delay\u003c\/li\u003e\n\u003cli\u003eTurn Off Time – Programmable\u003c\/li\u003e\n\u003cli\u003eMaster Reset\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003eVoltage is 115Vac\u003c\/li\u003e\n\u003cli\u003eCurrent capacity is 20Amps\u003c\/li\u003e\n\u003cli\u003eCircuit breaker is rated at 20Amps\u003c\/li\u003e\n\u003cli\u003eTypical Motor drive capability\u003cbr\u003e1HP at 115Vac\u003c\/li\u003e\n\u003cli\u003eInput power cord is 30” with the respective NEMA straight blade plug\u003c\/li\u003e\n\u003cli\u003eOutput power receptacle is the respective NEMA straight blade receptacle\u003c\/li\u003e\n\u003cli\u003eTurn ON Delay 0 or 1.5 seconds\u003c\/li\u003e\n\u003cli\u003eTurn Off Time 0, 5, 15 or 45seconds\u003c\/li\u003e\n\u003cli\u003eRange, 40’ line of sight\u003c\/li\u003e\n\u003cli\u003eMaximum ambient operating temperature, 30C\u003c\/li\u003e\n\u003cli\u003eRegulatory approval \u003cbr\u003eTUV certification to UL60950-1 and CSA 60950-\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003eWe strongly recommend the use of the \u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-contactor-115vac-trigger-10hp-capacity\" title=\"iVac Contactor; 115Vac Trigger; 10HP Capacity\" rel=\"noopener\" target=\"_blank\"\u003eiVAC Contactor\u003c\/a\u003e for dust collectors operating on 115Vac rated over 1HP and for any dust collector over 1.5HP operating on 230Vac.\u003c\/p\u003e","brand":"iVac","offers":[{"title":"Default Title","offer_id":46847544525089,"sku":"115-102S","price":99.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/115-102s_base.webp?v=1705895780"},{"product_id":"ivac-contactor-115vac-trigger-10hp-capacity","title":"iVac Contactor; 115Vac Trigger; 10HP Capacity","description":"\u003cp\u003e\u003cstrong\u003eiVAC Automated Dust Collection - Contactor (For Your Dust Collector)  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe iVAC CONTACTOR is basically a heavy duty 3 pole relay; housed in an electrical box. Used as a component of the iVAC Pro System, the iVAC Pro Contactor module has been designed to work with the iVAC Switch Box in order to switch high current surges to the dust collector. It can be controlled from an \u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-automatic-vacuum-switch-box\" target=\"_blank\" title=\"iVac Automatic Vacuum Switch Box\" rel=\"noopener\"\u003eiVAC Switch Box\u003c\/a\u003e or an \u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-pro-switch-115vac-20a\" target=\"_blank\" title=\"iVac Pro Switch; 115Vac; 20A\" rel=\"noopener\"\u003eiVAC Pro Switch 115-102S\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eIt has the ability to withstand start up currents of up to 150 Amps and then maintain a running current of up to 40 Amps. The contacts are also rated to operate at up to 240Vac, either single or three phase. This enables the iVAC Contactor to handle the 1.5HP dust collectors at 115Vac and up to 10HP at 230Vac 3 phase. The iVAC Contactor contains all UL approved electrical components and should be installed by a licensed electrician.\u003c\/p\u003e\n\u003cp\u003eThe iVAC Contactor should also be used in conjunction with the iVAC Pro SWITCH units. If your Dust Collector is more than 1HP on a 115Vac system OR more than 1.5HP on a 240Vac system you will need an iVAC Contactor. The iVAC Contactor can control dust collectors up to 10HP. \u003c\/p\u003e\n\u003cp\u003eNOTE - \u003cem\u003eYou MUST use a contactor IF your dust collector draws more than 9amps @ 115VAC or 8amps @240VAC.  Check Your Dust Collector's Motor Tag To Confirm It's Power Requirement.  \u003c\/em\u003eWhen building an iVAC Pro system, you Must use an \u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-automatic-vacuum-switch-box\" target=\"_blank\" title=\"iVac Automatic Vacuum Switch Box\" rel=\"noopener\"\u003eiVAC Switch Box\u003c\/a\u003e or an \u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-pro-switch-115vac-20a\" target=\"_blank\" title=\"iVac Pro Switch; 115Vac; 20A\" rel=\"noopener\"\u003eiVAC Pro Switch 115-102S\u003c\/a\u003e. Even though your Dust Collector may run on 230Vac the contactor has to be \"Triggered\" with 115Vac... and thus the correct iVAC Switch unit must be used.\u003c\/p\u003e","brand":"iVac","offers":[{"title":"Default Title","offer_id":46847576506657,"sku":"115-107","price":99.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/115-107_base.webp?v=1705897280"},{"product_id":"ivac-5-pc-auto-dust-collection-pack-w-115-vac-switch","title":"iVac 5-Pc. Auto Dust Collection Pack w\/ 115 VAC Switch","description":"\u003cp\u003eAutomate your dust collection system with this iVac Starter Pack. This package includes the basic items necessary to make your workshop's dust collection system fully automated and hassle-free on up to three machines.\u003c\/p\u003e\n\u003cp\u003eThe iVac Contactor connects directly to your dust collection vacuum. Compatible with any 115VAC or 220VAC dust collector up to 10HP, including 3-phase motors. The iVac Switch connects to the Contactor to receive signals from the three included iVac Pro Tool Plus units connected to your power tools. When you turn on one of your power tools, the iVac Pro Tool Plus detects the electrical current and sends a radio signal to the iVac Switch. This, in turn, activates the relay in the iVac Contactor connected to your dust collection vacuum. When the woodworking machine is powered off, the Pro Tool Plus sends another signal to the Switch \u0026amp; Contactor that shuts down the vacuum.\u003c\/p\u003e\n\u003cp\u003eUp to eight woodworking machines can run off a single iVac system with additional iVac Pro Tool Plus units available separately!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eThe iVac Contactor is required for dust collectors with a 8-amp motor or larger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne\u003cspan style=\"color: blue;\"\u003e \u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-contactor-115vac-trigger-10hp-capacity\"\u003eiVac Contactor\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e - Connects to your dust collection system to turn it on or off when a signal is received at the connected iVac Pro Switch. Allows you to easily upgrade to a larger dust collector in the future without modifications to your iVac configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne\u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-pro-switch-115vac-20a\"\u003e115-Volt iVac Pro Switch\u003c\/a\u003e\u003c\/strong\u003e - Connects to the iVac Contactor and receives signals from the Pro Tool Plus to turn the vacuum on and off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree\u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-pro-tool-plus\"\u003e iVac Pro Tool Plus units\u003c\/a\u003e\u003c\/strong\u003e - Each connects to an individual woodworking machine and sends a signal to the Switch when it detects that the woodworking machine is powered on\u003c\/li\u003e\n\u003cli\u003eiVac Pro Tool Plus easily clamps around the woodworking machine's power cord\u003c\/li\u003e\n\u003cli\u003eExpand with more Pro Tool Plus units to run up to \u003cstrong\u003eeight\u003c\/strong\u003e separate woodworking machines on one automated dust collection system\u003c\/li\u003e\n\u003cli\u003eThe \u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-fully-automated-pro-blast-gate\"\u003eiVac Automated Pro Blast Gates\u003c\/a\u003e are available separately for a totally automated dust collection system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUses in your shop:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatically turns your dust collection vacuum on and off when you use your power tools\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iVac","offers":[{"title":"Default Title","offer_id":46847593513249,"sku":"115-090","price":449.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/115-090_base.webp?v=1705899085"},{"product_id":"ivac-8-pc-auto-dust-collection-w-contactor","title":"iVac 8-Pc. Auto Dust Collection w\/ Contactor","description":"\u003cp\u003eAutomate your dust collection system on up to three tools with this complete iVac System. This package includes everything you need to make your workshop's dust collection system fully automated and hassle-free.\u003c\/p\u003e\n\u003cp\u003eThe iVac Contactor connects directly to your dust collection vacuum. Compatible with any 115VAC or 220VAC dust collector up to 10HP, including 3-phase motors. The iVac Switch connects to the Contactor to receive signals from the three included iVac Pro Tool Plus units connected to your power tools. When you turn on one of your power tools, the iVac Pro Tool Plus detects the electrical current and sends a radio signal to that tool's blast gate and the iVac Switch. This, in turn, activates the relay in the iVac Contactor connected to your dust collection vacuum. When the woodworking machine is powered off, the Pro Tool Plus sends another signal to the Switch \u0026amp; Blast Gate that shuts down the vacuum. Up to eight woodworking machines can run off a single iVac system with additional\u003ca rel=\"noopener\" href=\"https:\/\/infinitytools.mom\/products\/ivac-pro-tool-plus\" target=\"_blank\"\u003e iVac Pro Tool Plus\u003c\/a\u003e units available separately!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e The iVac Contactor is required for dust collectors with a 8-amp motor or larger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne \u003ca rel=\"noopener\" href=\"https:\/\/infinitytools.mom\/products\/ivac-contactor-115vac-trigger-10hp-capacity\" target=\"_blank\"\u003eiVac Contactor\u003c\/a\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.infinitytools.mom\/ivac-pro-accessories-3339\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/strong\u003e - Connects to your dust collection system to turn it on or off when a signal is received at the connected iVac Pro Switch. Allows you to easily upgrade to a larger dust collector in the future without modifications to your iVac configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne \u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-pro-switch-115vac-20a?_pos=1\u0026amp;_psq=ivac+pro+switch\u0026amp;_ss=e\u0026amp;_v=1.0\" rel=\"noopener\" target=\"_blank\"\u003e115-Volt iVac Pro Switch\u003c\/a\u003e\u003ca rel=\"noopener\" href=\"https:\/\/infinitytools.mom\/collections\/ivac-pro-switches\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/strong\u003e - Connects to the iVac Contactor and receives signals from the Pro Tool Plus to turn the vacuum on and off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree \u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-pro-tool-plus?_pos=1\u0026amp;_sid=6f41a0b3e\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eiVac Pro Tool Plus units\u003c\/a\u003e\u003ca rel=\"noopener\" href=\"https:\/\/infinitytools.mom\/products\/ivac-pro-tool-plus\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/strong\u003e - Each connects to an individual woodworking machine and sends a signal to the Switch when it detects that the woodworking machine is powered on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree \u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-automated-pro-blast-gates?_pos=1\u0026amp;_psq=ivac+blast+gates\u0026amp;_ss=e\u0026amp;_v=1.0\" rel=\"noopener\" target=\"_blank\"\u003eiVac Pro Blast Gates\u003c\/a\u003e\u003ca rel=\"noopener\" href=\"https:\/\/infinitytools.mom\/collections\/shop-essentials\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/strong\u003e that automatically turn on or off with the tool's power switch\u003c\/li\u003e\n\u003cli\u003eiVac Pro Tool Plus easily clamps around the woodworking machine's power cord\u003c\/li\u003e\n\u003cli\u003eExpand with more Pro Tool Plus units to run up to \u003cstrong\u003eeight\u003c\/strong\u003e separate woodworking machines on one automated dust collection system\u003c\/li\u003e\n\u003cli\u003eThe iVac Automated Pro Blast Gates are available separately for a totally automated dust collection system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUses in your shop:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatically turns your dust collection system and blast gates on and off when you use your power tools\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iVac","offers":[{"title":"Default Title","offer_id":46847595348257,"sku":"115-091","price":899.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/115-091.webp?v=1705899089"},{"product_id":"ivac-pro-tool-plus","title":"iVac Pro Tool Plus","description":"\u003cp style=\"text-align: left;\" align=\"center\"\u003e\u003cstrong\u003eStreamline Your Dust Collection System with the iVac Pro Tool Plus\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe iVac Pro Tool Plus brings an upgraded functionality to the original Pro Tool design that woodworkers in shops around the world are going to love.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe'll start with the best part - \u003c\/strong\u003eyou no longer have to figure out WHICH Pro Tool is going to work for your specific machines. This Pro Tool Plus fits on any power tool in your shop that works up to 220 volts, and can move from one machine to ther other as you need it, while the old Pro Tool was a slave to the specific voltage. You no longer have to worry about whether your power tool is 115vac, 220vac, needs the High Amp model, or anything of the sort. And when you're ready to upgrade your power to a bigger model, the Pro Tool Plus can carry straight over without a fuss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike\u003c\/strong\u003e the old device, the Pro Tool Plus is used to identify when your power tools are powered on, and then it wirelessly broadcasts a power-on signal to the\u003ca href=\"https:\/\/www.infinitytools.mom\/iVac-Pro-Switch\/products\/1792\/\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-pro-switch-115vac-20a\" title=\"iVac Pro Switch; 115Vac; 20A\" rel=\"noopener\" target=\"_blank\"\u003eiVac Pro Switch\u003c\/a\u003e attachement on your existing dust collector. So every time you turn on your power tool, the dust collection vacuum automatically activates without your needing to actiate it manually. When you turn the power tool off, the dust collection system turns off as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnlike\u003c\/strong\u003e the old device, setup is a cinche. You simply clip the Pro Tool Plus to the outside of your power tool's existing power chord, plug the included 10' long USB power plug for the Pro Tool Plus into a standard outlet, and it detects whether or not your machine is powered on without the need to mount it to the machine. It's also much smaller than the original Pro Tool, so you don't waste valuable shop space trying to shoehorn a large yellow box into the spaces around your larger woodworking tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatically detects your power tool's voltage and amperage\u003c\/li\u003e\n\u003cli\u003eSmall size takes up less room than the original Pro Tool Plus\u003c\/li\u003e\n\u003cli\u003eEasily movable to other machines in your workshop\u003c\/li\u003e\n\u003cli\u003eThree modes of operation: AUTO - OFF - ON\u003c\/li\u003e\n\u003cli\u003eProgrammable to pair with your \u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-pro-switch-115vac-20a\" title=\"iVac Pro Switch; 115Vac; 20A\" rel=\"noopener\" target=\"_blank\"\u003eiVac Pro Switch\u003c\/a\u003e and \u003ca href=\"https:\/\/infinitytools.mom\/products\/ivac-fully-automated-pro-blast-gate\" title=\"iVac Fully Automated Pro Blast Gate\" rel=\"noopener\" target=\"_blank\"\u003eiVac Pro Blast Gates\u003c\/a\u003e for fully automated dust collection\u003c\/li\u003e\n\u003cli\u003e40 feet of wireless range to reach every corner of your workshop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUses in your shop:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplace or add into your existing iVac Dust Collection Systems for hands-free activation of your dust collector and iVac Pro Automated Blast Gates.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iVac","offers":[{"title":"Default Title","offer_id":46847595577633,"sku":"115-111","price":89.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/115-111_base.webp?v=1705898385"},{"product_id":"ivac-4pc-auto-dust-collection-pack-with-vac-switch","title":"iVac 4-Pc. Auto Dust Collection Pack with VAC Switch","description":"\u003cp\u003e\u003cstrong\u003eiVac 4-Pc. Auto Dust Collection Pack With Auto Switch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eGet your dust collection system up and running on its own with these iVac Starter Packs. These packages include the basic items necessary to make your workshop's dust collection system fully automated and hassle free.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eChoose your package based on the voltage needs of your dust collection vacuum (115Vac or 240Vac). The iVac Pro Switch will turn your vacuum unit while the three included iVac Pro Tool Plus units connect directly to your power tools. When you turn on one of your power tools, the attached Pro Tool Plus detects the electrical current flowing through the machine's power cable and sends a radio signal to the iVac Switch connected to your dust collection vacuum. When the woodworking machine is powered off, the Pro Tool Plus sends another signal to the Switch that shuts down the vacuum.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eUp to eight woodworking machines can run off a single iVac system, so you can expand from this basic pack until your whole workshop is radio controlled and hands free!\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFeatures Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree iVac Pro Tool Plus units\u003c\/strong\u003e - Each connects to an individual woodworking machine and sends a signal to the Switch when it detects that the woodworking machine is powered on\u003c\/li\u003e\n\u003cli\u003eiVac Pro Tool Plus easily attaches to the outside of any woodworking machine's power cord, so no need to worry about compatibility of voltage or amperage for your machine\u003c\/li\u003e\n\u003cli\u003eExpand with more Pro Tool Plus units to run up to eight separate woodworking machines on one automated dust collection system\u003c\/li\u003e\n\u003cli\u003eGo even further with the iVac Automated Pro Blast Gates for completely hands-free dust collection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003ePackage Differences:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eEach package comes with three iVac Pro Tool Plus Units\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003e\n\u003cstrong\u003ePackage 115-095: One 115 Volt iVac Pro Switch\u003c\/strong\u003e - Connects to your dust collection vacuum and receives signals from the Pro Tool Plus to turn the vacuum on and off\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003e\n\u003cstrong\u003ePackage 115-096: One 240 Volt iVac Switch\u003c\/strong\u003e - Connects to your dust collection vacuum and receives signals from the Pro Tool Plus to turn the vacuum on and off\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eUses in your shop:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eAutomatically turns your dust collection vacuum on and off when you use your power tools\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iVac","offers":[{"title":"115","offer_id":50141726277921,"sku":"115-095","price":349.9,"currency_code":"USD","in_stock":true},{"title":"240","offer_id":50141726310689,"sku":"115-096","price":349.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/115-095_base_6a62871d-9ef0-4510-9952-5ceaa6244fae.webp?v=1723243098"},{"product_id":"ivac-7pc-auto-dust-collection-pack-with-vac-switch","title":"iVac 7-Pc. Auto Dust Collection Pack with VAC Switch","description":"\u003cp\u003e\u003cstrong\u003eiVac 7-Pc. Auto Dust Collection Master Package\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSet your workshop up with the completely automated dust collection master package. This seven piece set comes with the\u003cstrong\u003e iVac Pro Switch\u003c\/strong\u003e, three\u003cstrong\u003e iVac Pro Tool Plus\u003c\/strong\u003e units, and three\u003cstrong\u003e iVac Automated Blast Gates\u003c\/strong\u003e - everything you need to make your workshop a totally hands-free dust collection zone.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eChoose your package below based on the voltage needs of your dust collection vacuum \u003cstrong\u003e(115Vac or 240Vac).\u003c\/strong\u003e The iVac Pro Switch attaches to your vacuum unit while the three included iVac Pro Tool Plus units connect directly to your power tools. When you turn on one of your power tools, the attached Pro Tool Plus detects the electrical current flowing through the machine's power cable and sends a radio signal to the iVac Switch connected to your dust collection vacuum. When the woodworking machine is powered off, the Pro Tool Plus sends another signal to the Switch that shuts down the vacuum.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eIn the middle of these two powerful devices is the iVac Pro Automated Blast Gate. The blast gate receives the signal put out by your iVac Pro Tool when the corresponding woodworking machine is activated then opens and closes automatically. All the suction in your dust collection system is immediately directed to the activated machines, which means you will never have to clean out dust from an unopened blast gate fixture again.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eUp to eight woodworking machines can run off a single iVac system, so you can expand from this basic pack until your whole workshop is radio controlled and hands free!\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFeatures Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne iVac Switch (115v or 240v depending on the package you want)\u003c\/strong\u003e - Connects to your dust collection vacuum and receives signals from the Pro Tool Plus to turn the vacuum on and off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree iVac Pro Tool Plus\u003c\/strong\u003e - Each connects to an individual woodworking machine and sends a signal to the Switch when it detects that the woodworking machine is powered on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree iVac Pro Automated Blast Gates\u003c\/strong\u003e - Opens and closes automatically to direct the flow of air through your dust collection and ensure maximum suction at each activated workstation\u003c\/li\u003e\n\u003cli\u003eiVac Pro Tool Plus easily attaches to the outside of any woodworking machine's power cord\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iVac","offers":[{"title":"115","offer_id":50141726900513,"sku":"115-097","price":799.9,"currency_code":"USD","in_stock":true},{"title":"240","offer_id":50141726933281,"sku":"115-098","price":799.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/115-097_base_1_ba107602-db75-416a-bc64-729360727c7b.webp?v=1723243108"},{"product_id":"ivac-fully-automated-pro-blast-gate","title":"iVac Fully Automated Pro Blast Gate","description":"\u003cp\u003e\u003cstrong\u003eBreathe Easy With Automated Dust Collection For Ultimate Workshop Safety!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDust collector blast gates let you control a dust collection system’s vacuum pressure in order to achieve maximum suction at a desired tool station. Here’s how they work:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAt each key tool station, a hose is attached to the tool and routed to the main dust collector vacuum\u003c\/li\u003e\n\u003cli\u003eFor each hose run, a gate is installed that can be turned on or off.\u003c\/li\u003e\n\u003cli\u003eThe blast gates are typically closed. When one gate is opened all vacuum pressure is made available to that tool station\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe iVAC Pro family of automated dust collector blast gates lets you control vacuum flows precisely and automatically. All of our blast gates are electrically driven and programmable. There are three methods of controlling an iVAC Pro Blast Gate:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cb\u003eFully Automatic:\u003c\/b\u003e When the power tool is turned on, the iVAC Tool Interface (iVAC Pro Tool, Pro Tool HP, Pro Tool Plus Auto Sensor) sends a wireless signal instructing the iVAC Pro Switch to turn on the Dust Collector, and this same signal is used to instruct the blast gate to open. When the power tool turns off it instructs the blast gate to close.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eiVAC Pro Remote:\u003c\/b\u003e In this mode an iVAC Pro Remote is used to send the Open and Close commands to the pro blast gate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemotely from a wired cable:\u003c\/b\u003e In this mode the operation of a toggle switch on a wired cable will instruct the blast gate to open or close.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFully automated, radio controlled opening and closing of dust collection blast gates\u003c\/li\u003e\n\u003cli\u003eTurns off power automatically when dust collection system is not in use\u003c\/li\u003e\n\u003cli\u003eHands free dust collection of up to eight stations in your workshop\u003c\/li\u003e\n\u003cli\u003eVisually confirm open or closed gates with automated green status flag\u003c\/li\u003e\n\u003cli\u003eFully FCC compliant radio transmitters that control the automated blast gates whenver your power tool is turned on\u003c\/li\u003e\n\u003cli\u003eOne Blast Gate Always Open feature to accommodate high performance systems\u003c\/li\u003e\n\u003cli\u003eMotor overload protection\u003c\/li\u003e\n\u003cli\u003eSelf Cleaning mechanisms\u003c\/li\u003e\n\u003cli\u003eOpen\/Closed indicator lamp\u003c\/li\u003e\n\u003cli\u003eRemovable slides\u003c\/li\u003e\n\u003cli\u003eAuto – Open – Close modes of operation\u003c\/li\u003e\n\u003cli\u003eBlast gate is powered from a 115Vac UL\/CSA approved AC adaptor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUses in your shop:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNever think about opening or closing a blast gate again!\u003c\/li\u003e\n\u003cli\u003eSave your back the strain of reaching down and around to get at a blast gate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iVac","offers":[{"title":"4\"","offer_id":50141727228193,"sku":"115-108","price":159.9,"currency_code":"USD","in_stock":true},{"title":"6\"","offer_id":50141727260961,"sku":"115-109","price":339.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/115-108_hero_43c35ade-b56f-433a-a1db-d8e5586383eb.jpg?v=1723243118"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/collections\/1_ivac-products.jpg?v=1706055706","url":"https:\/\/infinitytools.mom\/collections\/ivac-automated-dust-collection.oembed","provider":"Infinity Cutting Tools","version":"1.0","type":"link"}